Old School Mac [2] : solution to sync iCal to a Nokia 3650

— THIS IS A REPOST FROM LONG WAY BACK ; JUST FOR ENTERTAINMENT — ORIGINALLY POSTED ON MACFIXIT IN 2003

[special thanks to Stewa / Andy on MacOSX Hints for the basic solution]

note : this is tested for the Nokia3650 only, but it should work on any mobile phone with SymbianOS

problem : if you set up a Nokia3650 mobile phone to iSync with your Mac’s Address Book and iCal over Bluetooth, iSync will still only be available for Address Book

(you can check this : if you properly setup your Nokia3650 for Bluetooth syncing using the Bluetooth Setup Assistant, the Nokia3650 tab in iSync will still ‘grey out’ all settings regarding iCal)

…and only the Address Book wil be iSynced

question : how can I make iCal-syncing available ??

step-by-step solution :

STEP 1 : make sure your Bluetooth connection is properly setup (if the Address Book syncs, your okay)

STEP 2 : find the file [harddisk] / Library / Application Support / SyncService / 501 / SymbianConduitDefaults.plist

STEP 3 : duplicate this file and move the duplicate to a different location (i.e. a backup location)

STEP 4 : open the original SymbianConduitDefaults.plist with the TextEdit application

STEP 5 : edit the line

<key>kNSSyncDeviceUSeCalendars</key> <false/>

into

<key>kNSSyncDeviceUSeCalendars</key> <true/>

STEP 6 : save the edited file

STEP 7 : open iSync and click on the Nokia3650 icon to open the stettings tab for the Nokia3650

STEP 8 : UNcheck the option “Contacts” ; now “Calendars” will still stay ‘grayed out’, but the option to select “All” or “Selected” will be available

STEP 9 : set the “Calendars” stettings the way you want them to sync

STEP 10 : (re)check the option “Contacts”

STEP 11 : start syncing by clicking the “Sync Now” icon in the iSync panel

…that’s it. just wait for your calendars to appear on your Nokia3650 now…

————————-

maybe the following is also important to get things working properly (without duplicates) :

STEP 1 – go to iCal and make a new (extra) calendar, name it “input [name of mobile phone]”

STEP 2 – go to iSync and set the Calendar syncing settings to “Selcted” and select ONLY these :

  • the orignal (main) calendars you maintain in iCal ; normally called “Work” and “Home”
  • the extra calendar named “input [name of mobile phone]”

STEP 3 – now, for “Put events created on [mobile phone] into” select “input [name of mobile phone]”

STEP 4 – repeat these 3 steps for your Palm and for any other device you want to sync with iSync (do NOT forget to UNcheck “All” and check ONLY the appropriate calendars in “Selected”) so finally every device should have it’s own ‘input calendar’ in iCal

STEP 5 – now start syncing using the “Sync Now” button in iSync (or if you’re including a Palm into your syncing, sync from the “HotSync” option on your Palm)

the original post(s) can be found here :

http://archive.macfixitforums.com/ubbthreads.php/topics/107786

Old School Mac [1] : share internet among OSX-Windows-OS9

— THIS IS A REPOST FROM LONG WAY BACK ; JUST FOR ENTERTAINMENT — ORIGINALLY POSTED ON MACFIXIT IN 2003

I finally figured out how to share the cable internet connection from my OSX-G4 with my WinMe-PC and my old OS9-Mac !! (without a Router !! – just a Hub !!)

NOTE : I only tested this with WinMe, but it should work with any Win-version from Win95 onwards (because Win95/98/98SE/Me are all from the same OS-family and WinXP is also quite similar – even a little easier on networking)

Here’s how to do it :

STEP 1 : HARDWARE SETUP

  • connect the incoming UTP-cable to the Build-in Ethernet-card on the G4
  • connect the UTP-cable for local networking from the G4’s 2nd Ethernet-card to the Hub
  • connect another UTP-cable from the PC to the Hub
  • connect yet another UTP-cable from the OS9-Mac to the Hub
  • IMPORTANT : make sure that all UTP-cables are connected to ‘normal’ Hub-ports ; do not connect to the Uplink-port, because that will prevent from using the Network-printer

STEP 2 : OSX INTERNET-CONNECTION VIA BUILT-IN ETHERNET-CARD SETUP

  • go to Apple Menu / System Preferences / Network / Built-in Ethernet
  • in TCP/IP : choose ‘Using DHCP’
  • in PPPoE : leave all alone
  • in AppleTalk : choose ‘Off’ [uncheck switch]
  • in Proxies : choose ‘Use Passive…’

STEP 3 : OSX LOCAL NETWORK (LAN)-CONNCETION VIA 2ND ETHERNET-CARD SETUP

  • go to Apple Menu / System Preferences / Network / … [name of 2nd Ethernet-card]
  • in TCP/IP : type IP Address = 192.168.0.1 [or any alternative you choose]
  • in TCP/IP : type Subnet Mask = 255.255.255.0
  • in PPPoE : leave all alone
  • in AppleTalk : choose ‘On’ [check switch]
  • in Proxies : choose ‘Use Passive…’

STEP 4 : OSX LOCAL NETWORK (LAN)-CONNECTION FIREWALL SETUP

  • go to Apple Menu / System Preferences / Sharing / Firewall
  • put Firewall ‘On’
  • add ‘New’ to open an extra connection port
  • click ‘Other’ and type the Port Number that is needed to connect to your Internet Service Provider (ISP)’s Proxy [e.g. 80] -> give this new port a Description [e.g. your ISP’s name]
  • go to Apple Menu / System Preferences / Sharing / Internet
  • put Internet Sharing ‘On’

STEP 5 : WIN-ME (PC) LOCAL NETWORK (LAN)-CONNECTION SETUP

  • go to Start / Preferences / Configuration Panes / Network / Configuration
  • select ‘TCP/IP -> …’ [for your Ethernet-card]
  • select ‘Configure’ : a window ?TCP/IP? opens
  • in IP-address : choose ‘manually configure IP-address’
  • type IP-address = 192.168.0.2 [or any other IP-address you choose]
  • type Subnet Mask = 255.255.255.0
  • in WINS : leave all alone
  • in Gateway : add 192.168.0.1 [the IP-address of the interent-connected OSX-Mac]
  • in DNS-configuration : choose ‘activate DNS’
  • type Host = … [network-name of the OSX-Mac]
  • type Domain = … [network-name ot the Workgroup both the OSX-Mac and PC are part of]
  • add all (normally 2) DNS-server IP-addresses your ISP has provided
  • in Bindings : check both ‘File- and Printer-sharing’ and ‘Client for Microsoft Networks’
  • in Advanced : leave all alone
  • in NetBIOS : leave all alone

STEP 6 : WIN-ME (PC) INTERNET BROWSER SETUP

  • go to Start / Applications / Internet Explorer / Extra / Internet Options
  • in Connections : choose ‘LAN-configuration’
  • in LAN-Configuration : uncheck ‘automatically detect…’
  • in LAN-Configuration : uncheck ‘use automatic configuration script’
  • in LAN-Configuration : check ‘use Proxy
  • type Address = … [the Proxy-IP-address your ISP has provided]
  • type Port = … [the Proxy Port-number your ISP has provided]
  • check ‘do not use Proxy for local …’

STEP 7 : OS9-MAC SETUP

  • go to Apple Menu / Control Panels / TCP/IP
  • choose ‘Configure Manually’
  • type IP Address = 192.168.0.3 [or any other IP-address you choose]
  • type Subnet Mask = 255.255.255.0
  • type Router = 192.168.0.1 [the IP-address of the OSX-Mac]
  • type Nameserver Address = … [the DNS-server IP-addresses your ISP has provided]
  • choose ‘Options’
  • check Make Active ‘Always’
  • go back – choose ‘Info’
  • see if all settings are made correctly
  • go to Internet Explorer / Edit / Preferences / Proxies
  • check ?Web Proxy?
  • type Web Proxy = …. [the Proxy-IP-address your ISP has provided]
  • type Port = … [the Proxy Port-number your ISP has provided]
  • check ?Always Use Web Proxy?

…that’s it – it’s that simple (looking back solutions always seem obvious…)

…but there’s one little flaw : MacOSX 10.2 “Jaguar” automatically turns off Internet Sharing on restart… only upgrading to MacOSX 10.3 “Panther” will fix that…

——————–

in this setup, it’s also very easy to make your PC’s harddisk(s), CDromplayer(s) and floppydisk available for MacOSX :

  • on the Windows Desktop go to ‘My Computer’
  • right-click the icon of the disk or drive you would like to share
  • in the pull-down menu that appears, select ‘Share…’
  • under the Share-tab, select ‘Shared as’
  • type Sharename = … [anything you like]
  • select Access Type = Full
  • click ‘OK’

…now ‘a hand’ has appeared under the icon, meaning this is a ‘shared disk’

to connect from MacOSX :

  • go to Finder / Go / Connect to Server… [or type Apple-K while in the Finder]
  • type Address = smb://192.168.0.2 [the PC’s IP-address]

…and you get a pop-up window asking you which PC-‘shared disk’ to mount

the original post(s) can be found here :

http://archive.macfixitforums.com/ubbthreads.php/ubb/showflat/Number/483947/site_id/1#import