Tag Archives: M1 Mac

fixed : CanoScan 5600F driver for macOS 15 Sequoia

Posted on by
Reply

Question :

I have a Canon CanoScan 5600F scanner that worked great with my previous Mac, but now I have upgraded to a new M4 Mac running macOS 15 Sequoia.

I’ve looked on the Canon website and searched the internet, but there is no macOS 15 Sequoia compatible driver available for this scanner.

Is there any way to use this CanoScan 5600F scanner in macOS 15 Sequoia ?

Answer :

Yes, there is …and it still works (nearly) the same way on Intel Macs and Apple silicon (M1/M2/M3/M4) Macs running macOS 15 Sequoia :

  • goto Canon’s US website : https://www.usa.canon.com
  • choose Support > Scanners > Film & Negative Scanner > CanoScan 5600F
  • or use this link : https://www.usa.canon.com/internet/portal/us/home/support/details/scanners/film-negative-scanner/canoscan-5600f/canoscan-5600f?subtab=downloads-drivers
  • there, click on the “Drivers & Downloads” tile (huge button)
  • then, choose “macOS Mojave v10.14” (even though your on macOS Sequoia v15 – don’t worry) as your operating system and “English” as your language
  • now, you will see 2 drivers listed :
    • > 5600F Scanner Driver Ver.14.11.5h (Mac) : msd_-mac_cs5600f-14_11_5h-ea8_2.dmg
      • > ICA Driver Ver.4.1.4a (Mac) : misd-mac-ijscanner2-4_1_4-ea21_3.dmg
  • download both of them
    • note that despite the fact that both are versions from 2018, these will still work with macOS 15 Sequoia
  • goto your downloads folder
  • first, double-click on the file named msd_-mac_cs5600f-14_11_5h-ea8_2.dmg
  • this will mount the ScanGear_CanoScan 5600F_141105.pkg
  • again, click on that and version 14.11 of the ScanGear driver installer will open
  • now, follow the on-screen directions and the latest ScanGear driver will be installed
  • if you have an M1/M2/M3/M4 Mac, you will need to allow to allow the Rosetta Intel-simulator software too (probably only needed for the installer, the actual driver can probably do without)
  • then, double-click on the file named misd-mac-ijscanner2-4_1_4-ea21_3.dmg
  • this will mount the Canon IJScanner2_040104.pkg
  • again, click on that and version 4.1.4 the IJScanner2 driver installer will open
  • now, follow the on-screen directions and the latest IJScanner2 driver will be installed
  • when done, click on the Apple-logo top-left in the top menu bar
  • in the pulldown menu that appears, click on “System Settings”
  • in the window that opens, scroll down in the menu list on the left and click on “Printers & Scanners”
  • if the CanoScan 5600F is already listed in the Scanners chapter, click it
  • if not, click the “Add Printer, Scanner or Fax” button first to add the scanner
  • when done, click the CanoScan 5600F in the Scanners chapter
  • when the scanner details open on the right, click on the “Open Scanner”-button
  • now, the built-in macOS ImageCapture.app will open and it will immediately do a preview scan of whatever is in the scanner

NOTE : you might run into a small problem every once in a while ; when the automatic scanning preview starts, you might get an error saying “Scanner reported an error – Cannot communicate with scanner for these reasons: – Scanner is turned off. – USB cable is disconnected. Please check and try again.” If so, just flip the scanner’s ON/OFF-switch in OFF-position manually and then back into ON-position. Then click “OK” in the error message window, then click the “Overview” button in the ImageCapture window. That should help in making the scanner preview work again.

enjoy 😉

fixed : get a transcription of a YouTube video

Posted on by
Reply

I have been watching a YouTube video that was so interesting that I would like to have the text transcribed for reviewing later on.

Is there a FREE and easy way to get a text transcript of a YouTube video ?


Answer :
Yes, there is.
It all depends on the quality of the transcription that you want ot get which type of transcription will suit you best. Previously, the three (‘other’) options listed at the bottom of this post were some of the best around, but things are developing fast in the world of AI, and there now is one FREE option that will probably suit everyone that has an M1 / M2 / M3 / M4 Mac :

Whisper AI – Speech to Text
– get it in the Mac AppStore (make sure you get the app that is by Rocket Techology Inc.) :
https://apps.apple.com/nl/app/whisper-ai-speech-to-text/id6738070552?l=en-GB&mt=12
– type : macOS native app for video/audio transcription ( for self-recorded, live or downloaded video )
– output : options to export to .txt, .docx or .html file
– accuracy : the ‘tiny’ Whisper-model that is preloaded is quite fast and rather accurate (and for more accuracy and or speaker recognition you can download more advanced Whisper-models using the ‘Manage Models’ option)
– privacy : high, as it runs entirely offline ( according to the developer )
– speed : made for Apple Silicon Macs, so extremely fast on M1/M2/M3/M4-Macs


Here are three other options :

Tactiq.io
– use it online at : https://tactiq.io
– type : online video/audio transcription ( for Youtube video ) – the FREE plan can now only be used through the Tactiq Chrome browser extension ( so no longer an option for Safari… )
– output : an auto-generated ( not very accurate ) subtitling .srt document converted into a plain text document
– privacy : low, as it runs online
– speed : extremely fast, but the output is just the subtitles-file converted into plain text ( so including all the time stamps – if you want to get rid of those, you can do that in ChatGPT or something )

Transcribe.mov
– use it online at : https://www.transcribe.mov
– type : online video/audio transcription ( for YouTube video )
– output : a rather accurate plain text document
– privacy : low, as it runs online
– speed : slightly faster that playing the original video : takes 7 minutes to transcribe 15 minutes of video

Aiko
– get it in the Mac AppStore : https://apps.apple.com/us/app/aiko/id1672085276&ved=2ahUKEwikv-LT85uLAxUpSf4FHZEZEisQFnoECAwQAQ&usg=AOvVaw1s9T7EI1AzX63HnIjAhNuZ
– type : macOS native app for video/audio transcription ( for self-recorded, live or downloaded video )
– output : a rather accurate plain text document
– privacy : high, as it runs entirely offline ( according to the developer )
– speed : made for Apple Silicon Macs, so extremely fast on M1/M2/M3/M4-Macs : takes just 1 to 5 minutes to transcribe 15 minutes of video – but very slow on Intel-Macs : takes about 5 hours ( ! ) to transcribe 15 minutes of video ( because Intel-Macs don’t have the neural engine )

So it all depends on your needs what the best solution is… so take your pick !

enjoy 😉

fixed : CanoScan 5600F driver for macOS Sonoma

Posted on by
5

Question :

I have a Canon CanoScan 5600F scanner that worked great with my previous Mac, but now I have upgraded to a new M1 Mac running macOS 14 Sonoma.

I’ve looked on the Canon website and searched the internet, but there is no macOS 14 Sonoma compatible driver available for this scanner.

Is there any way to use this CanoScan 5600F scanner in macOS 14 Sonoma ?

Answer :

Yes, there is …and it still works this way on Intel i5/i7-Mas running macOS 14 Sonoma, and almost certainly on M1 (and M2) Macs also (since it worked on M1/M2-Macs in macOS 13 Ventura) :

  • goto Canon’s US website : https://www.usa.canon.com
  • choose Support > Scanners > Film & Negative Scanner > CanoScan 5600F
  • or use this link : https://www.usa.canon.com/internet/portal/us/home/support/details/scanners/film-negative-scanner/canoscan-5600f/canoscan-5600f?subtab=downloads-drivers
  • there, click on the “Drivers & Downloads” tile (huge button)
  • then, choose “macOS Mojave v10.14” (even though your on macOS Sonoma v14 – don’t worry) as your operating system and “English” as your language
  • now, you will see 2 drivers listed :
    • > 5600F Scanner Driver Ver.14.11.5h (Mac) : msd_-mac_cs5600f-14_11_5h-ea8_2.dmg
      • > ICA Driver Ver.4.1.4a (Mac) : misd-mac-ijscanner2-4_1_4-ea21_3.dmg
  • download both of them
    • note that despite the fact that both are versions from 2018, these will still work with macOS 14 Sonoma
  • goto your downloads folder
  • first, double-click on the file named msd_-mac_cs5600f-14_11_5h-ea8_2.dmg
  • this will mount the ScanGear_CanoScan 5600F_141105.pkg
  • again, click on that and version 14.11 of the ScanGear driver installer will open
  • now, follow the on-screen directions and the latest ScanGear driver will be installed
  • then, double-click on the file named misd-mac-ijscanner2-4_1_4-ea21_3.dmg
  • this will mount the Canon IJScanner2_040104.pkg
  • again, click on that and version 4.1.4 the IJScanner2 driver installer will open
  • now, follow the on-screen directions and the latest IJScanner2 driver will be installed
  • when done, click on the Apple-logo top-left in the top menu bar
  • in the pulldown menu that appears, click on “System Settings”
  • in the window that opens, scroll down in the menu list on the left and click on “Printers & Scanners”
  • if the CanoScan 5600F is already listed in the Scanners chapter, click it
  • if not, click the “Add Printer, Scanner or Fax” button first to add the scanner
  • when done, click the CanoScan 5600F in the Scanners chapter
  • when the scanner details open on the right, click on the “Open Scanner”-button
  • now, the built-in macOS ImageCapture.app will open and it will immediately do a preview scan of whatever is in the scanner

NOTE : you might run into a small problem every once in a while ; when the automatic scanning preview starts, you might get an error saying “Scanner reported an error – Cannot communicate with scanner for these reasons: – Scanner is turned off. – USB cable is disconnected. Please check and try again.” If so, just flip the scanner’s ON/OFF-switch in OFF-position manually and then back into ON-position. Then click “OK” in the error message window, then click the “Overview” button in the ImageCapture window. That should help in making the scanner preview work again.

enjoy 😉

fixed : CanoScan 5600F driver for macOS Ventura

Posted on by
2

Question :

I have a Canon CanoScan 5600F scanner that worked great with my previous Mac, but now I have upgraded to a new M1 Mac running macOS 13 Ventura.

I’ve looked on the Canon website and searched the internet, but there is no macOS 13 Ventura compatible driver available for this scanner.

Is there any way to use this CanoScan 5600F scanner in macOS 13 Ventura ?

Answer :

Yes, there is …and it is reported to work on M1 (and M2) Macs also [ thanks ! @Stefan ] :

  • goto Canon’s US website : https://www.usa.canon.com
  • choose Support > Scanners > Film & Negative Scanner > CanoScan 5600F
  • or use this link : https://www.usa.canon.com/internet/portal/us/home/support/details/scanners/film-negative-scanner/canoscan-5600f/canoscan-5600f?subtab=downloads-drivers
  • there, choose the “Drivers & Downloads” tab
  • then, choose “macOS Mojave v10.14” (even though your on macOS Ventura v13 – don’t worry) as your operating system and “English” as your language
  • then, choose the “Drivers” tab
  • now, you will see 2 drivers listed :
    • > 5600F Scanner Driver Ver.14.11.5h (Mac) : msd_-mac_cs5600f-14_11_5h-ea8_2.dmg
      • > ICA Driver Ver.4.1.4a (Mac) : misd-mac-ijscanner2-4_1_4-ea21_3.dmg
  • download both of them
    • note that despite the fact that both are versions from 2018, these will still work with macOS 11.0 Big_Sur
  • goto your downloads folder
  • first, double-click on the file named msd_-mac_cs5600f-14_11_5h-ea8_2.dmg
  • this will mount the ScanGear_CanoScan 5600F_141105.pkg
  • again, click on that and version 14.11 of the ScanGear driver installer will open
  • now, follow the on-screen directions and the latest ScanGear driver will be installed
  • then, double-click on the file named misd-mac-ijscanner2-4_1_4-ea21_3.dmg
  • this will mount the Canon IJScanner2_040104.pkg
  • again, click on that and version 4.1.4 the IJScanner2 driver installer will open
  • now, follow the on-screen directions and the latest IJScanner2 driver will be installed
  • when done, goto System Preferences > Printers & Scanners
  • if the CanoScan 5600F is already listed on the left, click it
  • if not, click the +sign (plus-sign) to add the scanner first
  • when done, click the CanoScan 5600F in the list on the left
  • when the scanner details open on the right, click on the “Open Scanner”-button
  • now, the built-in macOS scanner-app will open and it will immediately do a preview scan of whatever is in the scanner

NOTE : you might run into a small problem every once in a while ; when the automatic scanning preview starts, you might get an error saying “Scanner reported an error – Cannot communicate with scanner for these reasons: – Scanner is turned off. – USB cable is disconnected. Please check and try again.” If so, just flip the scanner’s ON/OFF-switch in OFF-position manually and then back into ON-posistie. That should help in making the scanner preview work again.

enjoy 😉