fixed : use unsupported scanner in OSX 10.11 El_Capitan

Question :

I have a Canon CanoScan LiDE 20 that used to work perfectly in MacOSX 10.6 Snow Leopard. But now I’ve bought a new Mac which runs OSX 10.11 El_Capitan, I can’t seem to install it, since Canon doesn’t update the drivers anymore.

What can I do ?

Answer :

In OSX 10.7 Lion, 10.8 Mountain Lion, 10.9 Mavericks, 10.10 Yosemite and 10.11 El_Capitan, any TWAIN-supporting scanner can be used without any additional software.

A list of supported scanners for OSX 10.9 Mavericks can be found here.

Here’s a quick step-by-step instruction :

– connect your scanner directly to your Mac using a USB-cable

– open the System Preferences

– then click on “Print & Scan”

– then, just below in the list of printers on the left, click on the “+”-sign

– that will bring up the “Add”-window, which enables you to add a new printer or scanner

– if your scanner is TWAIN-supporting, it will show up there, and you just need to select it and click on the “Add”-button

– then it will be listed in the previous (“Print & Scan”) System Preferences window, and if you select it (and you put a piece of paper or a photo in the scanner), a Scanning Preview window will show up, allowing you to scan your document to file or eMail or something else…

but…

…for some printers, like the Canon CanoScan LiDE 20 and LiDE 30, the TWAIN-drivers are not included in OSX. In that case, you will need to install some generic (FREE) TWAIN-drivers :

IMPORTANT : do not forget to read this entire post, even all the notes at the bottom ! e.g. if you have an old CanoScan scanner, you might have to reinstall TWAINbridge.app also !

– for OSX 10.11 El_Capitan, download and install these files (in this same order) and restart you Mac after doing so, then your scanner will also show up in the “Print & Scan” System Preferences :

LibUSB for OSX 10.11

SANE Backends for OSX 10.11

SANE Preference Pane for OSX 10.11

TWAIN SANE Interface for OSX 10.11

for OSX 10.10 Yosemite, download and install these files (in this same order) and restart you Mac after doing so, then your scanner will also show up in the “Print & Scan” System Preferences :

libusb.pkg.tar.gz

sane-backends.pkg.tar.gz

SANE-Preference-Pane.pkg.tar.gz

TWAIN-SANE-Interface.pkg.tar.gz

– for OSX 10.9 Mavericks, download and install these files (in this same order) and restart your Mac after doing so, then your scanner will also show up in the “Print & Scan” System Preferences :

libusb.pkg.tar.gz

sane-backends.pkg.tar.gz

SANE-Preference-Pane.pkg.tar.gz

TWAIN-SANE-Interface.pkg.tar.gz

– for OSX 10.8 Mountain Lion, download and install these files (in this same order) and restart your Mac after doing so, then your scanner will also show up in the “Print & Scan” System Preferences :

libusb.pkg.tar.gz

sane-backends.pkg.tar.gz

SANE-Preference-Pane.pkg.tar.gz

TWAIN-SANE-Interface.pkg.tar.gz

– for MacOSX 10.7 Lion, download and install these files (in this same order) and restart your Mac after doing so, then your scanner will also show up in the “Print & Scan” System Preferences :

libusb.pkg.tar.gz

sane-backends.pkg.tar.gz

SANE-Preference-Pane.pkg.tar.gz

TWAIN-SANE-Interface.pkg.tar.gz

– if these files do not turn into regular .pkg-files when you click on them, you need unTAR-software like this :

The Unarchiver

– if you get an error-message telling you you can’t install this software (these drivers) since the are not from Apple-appoved developers, you need to :

– open the System Preferences

– then click on “Security & Privacy”

– then make sure the “General”-tab is selected

– click the padlock in the lower left corner and provide an Administrator name & password to unlock the padlock

– then at “Allow applications downloaded from:” select “Anywhere”

– and exit the System Preferences to make this setting stick

Note #1 :

TWAIN-supporting drivers (like SANE and the ones that come with OSX) will enable you to directly scan from within various applications like Photoshop, MS Word, GraphicConverter, OmniPage and OSX’s built-in Image Capture. [ please also read Note #7 and #8 for more tips on this ! ]

Alex Scheider has written a special SANE scanner app for OSX 10.7 and newer, you can download it here. A screenshot can be found here[haven’t tested it, so feedback on this is welcome]

Note #2 :

when using the SANE drivers, you will probably not be able to use the ‘one click’-buttons that are on the scanner itself…

Note #3 :

if your scanner lets you scan the first time, but after shut-down and restart scanning seems impossible because OSX can’t find the scanner, just plug-out the scanner’s USB-cable and plug it back in and everything should work again…

Note #4 :

if the “Scan”-button remains grayed-out, make sure that you have selected an area to scan… (put differently : if “Selection:” is set to “Off”, you will need to select an area to scan before the “Scan”-button will be ready to use…)

Note #5 :

if you get a distorted scan when scanning in landscape view (or any other rotated view), just scan normally in portrait view and rotate the scanned image afterwards (in Preview app or another image editing program, like Photoshop or Graphic Converter)

Note #6 :

if you are not able to scan as a JPEG (.jpg-flie), just scan as a TIFF (.tif-file) and convert the scanned image afterwards (in Preview app or another image editing program, like Photoshop or Graphic Converter)

Note #7 :

if your scanner doesn’t show up in Image Capture (especially in OSX 10.9 Mavericks), use this workaround :

go to System Prefecences –> Printers & Scanners –> [your scanner] –> Scan –> Open Scanner

Note #8 :

if your scanner doesn’t show up in Photoshop (especially in OSX 10.9 Mavericks), try this workaround :

go to Applications –> Adobe Photoshop CS# –> Adobe Photoshop CS# –> type “CMD” + “i” key-combo (on your keyboard) –> (in the Get Info window) select “Open in 32 bit mode” and exit Get Info

then open Adobe Photoshop (CS#-version) –> File –> Import –> SANE

Note #9 :

another option that might just work to get SANE drivers to connect with ImageCapture and Photoshop (especially if you have an older CANON scanner) is (re)installing the TWAINbrigde.app that Jan Egil has ready for download on his website.

for now, there is no version of TWAINbridge.app that runs in OSX 10.11 El_Capitan, the alternative seems to be to use the old CanoScan Toolbox 5.0 software that can be found on the Canon website or here

Credits :

Matias Ellert and the Open Source developers of the SANE project

…and a special thanks to Mónica, Jorge Blasio, torrealta, dencho, BobD and Jan Egil for Note #7, #8 and #9 ! [see comments below]

If you encounter any problems with these SANE drivers for OSX, try contacting Mattias Ellert directly as indicated here.

If you want to un-install the TWAIN SANE drivers, either use an un-installer application like AppCleaner or follow the instructions for manual un-install as outlined in Mattias Ellert’s FAQ (last question & answer).

Donate Button (MacManusNL)

Advertisements

fixed : use unsupported scanner in OSX 10.10 Yosemite

UPDATE : an updated version of this post can be found here : 

fixed : use unsupported scanner in OSX 10.11 El _Capitan

—————————————————–

Question :

I have a Canon CanoScan LiDE 20 that used to work perfectly in MacOSX 10.6 Snow Leopard. But now I’ve bought a new Mac which runs OSX 10.10 Yosemite, I can’t seem to install it, since Canon doesn’t update the drivers anymore.

What can I do ?

Answer :

In OSX 10.7 Lion, 10.8 Mountain Lion, 10.9 Mavericks and 10.10 Yosemite, any TWAIN-supporting scanner can be used without any additional software.

A list of supported scanners for OSX 10.9 Mavericks can be found here.

Here’s a quick step-by-step instruction :

– connect your scanner directly to your Mac using a USB-cable

– open the System Preferences

– then click on “Print & Scan”

– then, just below in the list of printers on the left, click on the “+”-sign

– that will bring up the “Add”-window, which enables you to add a new printer or scanner

– if your scanner is TWAIN-supporting, it will show up there, and you just need to select it and click on the “Add”-button

– then it will be listed in the previous (“Print & Scan”) System Preferences window, and if you select it (and you put a piece of paper or a photo in the scanner), a Scanning Preview window will show up, allowing you to scan your document to file or eMail or something else…

but…

…for some printers, like the Canon CanoScan LiDE 20 and LiDE 30, the TWAIN-drivers are not included in OSX. In that case, you will need to install some generic (FREE) TWAIN-drivers :

for OSX 10.10 Yosemite, download and install these files (in this same order) and restart you Mac after doing so, then your scanner will also show up in the “Print & Scan” System Preferences :

libusb.pkg.tar.gz

sane-backends.pkg.tar.gz

SANE-Preference-Pane.pkg.tar.gz

TWAIN-SANE-Interface.pkg.tar.gz

– for OSX 10.9 Mavericks, download and install these files (in this same order) and restart your Mac after doing so, then your scanner will also show up in the “Print & Scan” System Preferences :

libusb.pkg.tar.gz

sane-backends.pkg.tar.gz

SANE-Preference-Pane.pkg.tar.gz

TWAIN-SANE-Interface.pkg.tar.gz

– for OSX 10.8 Mountain Lion, download and install these files (in this same order) and restart your Mac after doing so, then your scanner will also show up in the “Print & Scan” System Preferences :

libusb.pkg.tar.gz

sane-backends.pkg.tar.gz

SANE-Preference-Pane.pkg.tar.gz

TWAIN-SANE-Interface.pkg.tar.gz

– for MacOSX 10.7 Lion, download and install these files (in this same order) and restart your Mac after doing so, then your scanner will also show up in the “Print & Scan” System Preferences :

libusb.pkg.tar.gz

sane-backends.pkg.tar.gz

SANE-Preference-Pane.pkg.tar.gz

TWAIN-SANE-Interface.pkg.tar.gz

– if these files do not turn into regular .pkg-files when you click on them, you need unTAR-software like this :

The Unarchiver

– if you get an error-message telling you you can’t install this software (these drivers) since the are not from Apple-appoved developers, you need to :

– open the System Preferences

– then click on “Security & Privacy”

– then make sure the “General”-tab is selected

– click the padlock in the lower left corner and provide an Administrator name & password to unlock the padlock

– then at “Allow applications downloaded from:” select “Anywhere”

– and exit the System Preferences to make this setting stick

Note #1 :

TWAIN-supporting drivers (like SANE and the ones that come with OSX) will enable you to directly scan from within various applications like Photoshop, MS Word, GraphicConverter, OmniPage and OSX’s built-in Image Capture. [ please also read Note #7 and #8 for more tips on this ! ]

Alex Scheider has written a special SANE scanner app for OSX 10.7 and newer, you can download it here. A screenshot can be found here[haven’t tested it, so feedback on this is welcome]

Note #2 :

when using the SANE drivers, you will probably not be able to use the ‘one click’-buttons that are on the scanner itself…

Note #3 :

if your scanner lets you scan the first time, but after shut-down and restart scanning seems impossible because OSX can’t find the scanner, just plug-out the scanner’s USB-cable and plug it back in and everything should work again…

Note #4 :

if the “Scan”-button remains grayed-out, make sure that you have selected an area to scan… (put differently : if “Selection:” is set to “Off”, you will need to select an area to scan before the “Scan”-button will be ready to use…)

Note #5 :

if you get a distorted scan when scanning in landscape view (or any other rotated view), just scan normally in portrait view and rotate the scanned image afterwards (in Preview app or another image editing program, like Photoshop or Graphic Converter)

Note #6 :

if you are not able to scan as a JPEG (.jpg-flie), just scan as a TIFF (.tif-file) and convert the scanned image afterwards (in Preview app or another image editing program, like Photoshop or Graphic Converter)

Note #7 :

if your scanner doesn’t show up in Image Capture (especially in OSX 10.9 Mavericks), use this workaround :

go to System Prefecences –> Printers & Scanners –> [your scanner] –> Scan –> Open Scanner

Note #8 :

if your scanner doesn’t show up in Photoshop (especially in OSX 10.9 Mavericks), try this workaround :

go to Applications –> Adobe Photoshop CS# –> Adobe Photoshop CS# –> type “CMD” + “i” key-combo (on your keyboard) –> (in the Get Info window) select “Open in 32 bit mode” and exit Get Info

then open Adobe Photoshop (CS#-version) –> File –> Import –> SANE

Note #9 :

another option that might just work to get SANE drivers to connect with ImageCapture and Photoshop (especially if you have an older CANON scanner) is (re)installing the TWAINbrigde.app that Jan Egil has ready for download on his website.

Credits :

Matias Ellert and the Open Source developers of the SANE project

…and a special thanks to Mónica, Jorge Blasio, torrealta, dencho, BobD and Jan Egil for Note #7, #8 and #9 ! [see comments below]

If you encounter any problems with these SANE drivers for OSX, try contacting Mattias Ellert directly as indicated here.

If you want to un-install the TWAIN SANE drivers, either use an un-installer application like AppCleaner or follow the instructions for manual un-install as outlined in Mattias Ellert’s FAQ (last question & answer).

Donate Button (MacManusNL)

fixed : use unsupported scanner in OSX 10.9 Mavericks

UPDATE : if you are running OSX 10.10 Yosemite, check out the updated version of this post here

——————————-

Question :

I have a Canon CanoScan LiDE 20 that used to work perfectly in MacOSX 10.6 Snow Leopard. But now I’ve bought a new Mac which runs OSX 10.9 Mavericks, I can’t seem to install it, since Canon doesn’t update the drivers anymore.

What can I do ?

Answer :

In OSX 10.7 Lion, 10.8 Mountain Lion and 10.9 Mavericks, any TWAIN-supporting scanner can be used without any additional software.

A list of supported scanners for OSX 10.9 Mavericks can be found here.

Here’s a quick step-by-step instruction :

– connect your scanner directly to your Mac using a USB-cable

– open the System Preferences

– then click on “Print & Scan”

– then, just below in the list of printers on the left, click on the “+”-sign

– that will bring up the “Add”-window, which enables you to add a new printer or scanner

– if your scanner is TWAIN-supporting, it will show up there, and you just need to select it and click on the “Add”-button

– then it will be listed in the previous (“Print & Scan”) System Preferences window, and if you select it (and you put a piece of paper or a photo in the scanner), a Scanning Preview window will show up, allowing you to scan your document to file or eMail or something else…

but…

…some for some printers, like the Canon CanoScan LiDE 20 and LiDE 30, the TWAIN-drivers are not included in OSX. In that case, you will need to install some generic (FREE) TWAIN-drivers :

– for OSX 10.9 Mavericks, download and install these files (in this same order) and restart your Mac after doing so, then your scanner will also show up in the “Print & Scan” System Preferences :

 

libusb.pkg.tar.gz

sane-backends.pkg.tar.gz

SANE-Preference-Pane.pkg.tar.gz

TWAIN-SANE-Interface.pkg.tar.gz

– for OSX 10.8 Mountain Lion, download and install these files (in this same order) and restart your Mac after doing so, then your scanner will also show up in the “Print & Scan” System Preferences :

libusb.pkg.tar.gz

sane-backends.pkg.tar.gz

SANE-Preference-Pane.pkg.tar.gz

TWAIN-SANE-Interface.pkg.tar.gz

– for MacOSX 10.7 Lion, download and install these files (in this same order) and restart your Mac after doing so, then your scanner will also show up in the “Print & Scan” System Preferences :

libusb.pkg.tar.gz

sane-backends.pkg.tar.gz

SANE-Preference-Pane.pkg.tar.gz

TWAIN-SANE-Interface.pkg.tar.gz

– if these files do not turn into regular .pkg-files when you click on them, you need unTAR-software like this :

The Unarchiver

– if you get an error-message telling you you can’t install this software (these drivers) since the are not from Apple-appoved developers, you need to :

– open the System Preferences

– then click on “Security & Privacy”

– then make sure the “General”-tab is selected

– click the padlock in the lower left corner and provide an Administrator name & password to unlock the padlock

– then at “Allow applications downloaded from:” select “Anywhere”

– and exit the System Preferences to make this setting stick

Note #1 :

TWAIN-supporting drivers (like SANE and the ones that come with OSX) will enable you to directly scan from within various applications like Photoshop, MS Word, GraphicConverter, OmniPage and OSX’s built-in Image Capture. [ please also read Note #7 and #8 for more tips on this ! ]

Note #2 :

when using the SANE drivers, you will probably not be able to use the ‘one click’-buttons that are on the scanner itself…

Note #3 :

if your scanner lets you scan the first time, but after shut-down and restart scanning seems impossible because OSX can’t find the scanner, just plug-out the scanner’s USB-cable and plug it back in and everything should work again…

Note #4 :

if the “Scan”-button remains grayed-out, make sure that you have selected an area to scan… (put differently : if “Selection:” is set to “Off”, you will need to select an area to scan before the “Scan”-button will be ready to use…)

Note #5 :

if you get a distorted scan when scanning in landscape view (or any other rotated view), just scan normally in portrait view and rotate the scanned image afterwards (in Preview app or another image editing program, like Photoshop or Graphic Converter)

Note #6 :

if you are not able to scan as a JPEG (.jpg-flie), just scan as a TIFF (.tif-file) and convert the scanned image afterwards (in Preview app or another image editing program, like Photoshop or Graphic Converter)

Note #7 :

if your scanner doesn’t show up in Image Capture (especially in OSX 10.9 Mavericks), use this workaround :

go to System Prefecences –> Printers & Scanners –> [your scanner] –> Scan –> Open Scanner

Note #8 :

if your scanner doesn’t show up in Photoshop (especially in OSX 10.9 Mavericks), try this workaround :

go to Applications –> Adobe Photoshop CS# –> Adobe Photoshop CS# –> type “CMD” + “i” key-combo (on your keyboard) –> (in the Get Info window) select “Open in 32 bit mode” and exit Get Info

then open Adobe Photoshop (CS#-version) –> File –> Import –> SANE

Note #9 :

another option that might just work to get SANE drivers to connect with ImageCapture and Photoshop (especially if you have an older CANON scanner) is (re)installing the TWAINbrigde.app that Jan Egil has ready for download on his website.

Credits :

Matias Ellert and the Open Source developers of the SANE project

…and a special thanks to Mónica, Jorge Blasio, torrealta, dencho, BobD and Jan Egil for Note #7, #8 and #9 ! [see comments below]

If you encounter any problems with these SANE drivers for OSX, try contacting Mattias Ellert directly as indicated here.

If you want to un-install the TWAIN SANE drivers, either use an un-installer application like AppCleaner or follow the instructions for manual un-install as outlined in Mattias Ellert’s FAQ (last question & answer).

Donate Button (MacManusNL)

fixed : use unsupported scanner in OSX 10.8 Mountain Lion

UPDATE : a list of supported scanners for OSX 10.9 Mavericks can be found here

UPDATE : Mattias Ellert has now updated the TWAIN SANE drivers, so there is a new version for OSX 10.9 Mavericks (and OSX 10.8 Mountain Lion), more on this can be found here

———————————

Question :

I have a Canon CanoScan LiDE 20 that used to work perfectly in MacOSX 10.6 Snow Leopard. But now I’ve bought a new Mac which runs OSX 10.8 Mountain Lion, I can’t seem to install it, since Canon doesn’t update the drivers anymore.

What can I do ?

Answer :

In OSX 10.7 Lion and 10.8 Mountain Lion any TWAIN-supporting scanner can be used without any additional software :

– connect your scanner directly to your Mac using a USB-cable

– open the System Preferences

– then click on “Print & Scan”

– then, just below in the list of printers on the left, click on the “+”-sign

– that will bring up the “Add”-window, which enables you to add a new printer or scanner

– if your scanner is TWAIN-supporting, it will show up there, and you just need to select it and click on the “Add”-button

– then it will be listed in the previous (“Print & Scan”) System Preferences window, and if you select it (and you put a piece of paper or a photo in the scanner), a Scanning Preview window will show up, allowing you to scan your document to file or eMail or something else…

but…

…some for some printers, like the Canon CanoScan LiDE 20 and LiDE 30, the TWAIN-drivers are not included in OSX. In that case, you will need to install some generic (FREE) TWAIN-drivers :

for OSX 10.8 Mountain Lion, download and install these files (in this same order) and restart your Mac after doing so, then your scanner will also show up in the “Print & Scan” System Preferences :

libusb.pkg.tar.gz

sane-backends.pkg.tar.gz

SANE-Preference-Pane.pkg.tar.gz

TWAIN-SANE-Interface.pkg.tar.gz

for MacOSX 10.7 Lion, download and install these files (in this same order) and restart your Mac after doing so, then your scanner will also show up in the “Print & Scan” System Preferences :

libusb.pkg.tar.gz

sane-backends.pkg.tar.gz

SANE-Preference-Pane.pkg.tar.gz

TWAIN-SANE-Interface.pkg.tar.gz

– if these files do not turn into regular .pkg-files when you click on them, you need unTAR-software like this :

The Unarchiver

– if you get an error-message telling you you can’t install this software (these drivers) since the are not from Apple-appoved developers, you need to :

– open the System Preferences

– then click on “Security & Privacy”

– then make sure the “General”-tab is selected

– click the padlock in the lower left corner and provide an Administrator name & password to unlock the padlock

– then at “Allow applications downloaded from:” select “Anywhere”

– and exit the System Preferences to make this setting stick

Note #1 :

TWAIN-supporting drivers (like SANE and the ones that come with OSX) will enable you to directly scan from within various applications like Photoshop, MS Word, GraphicConverter, OmniPage and OSX’s built-in Image Capture.

Note #2 :

when using the SANE drivers, you will probably not be able to use the ‘one click’-buttons that are on the scanner itself…

Note #3 :

if your scanner lets you scan the first time, but after shut-down and restart scanning seems impossible because OSX can’t find the scanner, just plug-out the scanner’s USB-cable and plug it back in and everything should work again…

Note #4 :

if the “Scan”-button remains grayed-out, make sure that you have selected an area to scan… (put differently : if “Selection:” is set to “Off”, you will need to select an area to scan before the “Scan”-button will be ready to use…)

Note #5 :

if you get a distorted scan when scanning in landscape view (or any other rotated view), just scan normally in portrait view and rotate the scanned image afterwards (in Preview app or another image editing program, like Photoshop or Graphic Converter)

Note #6 :

if you are not able to scan as a JPEG (.jpg-flie), just scan as a TIFF (.tif-file) and convert the scanned image afterwards (in Preview app or another image editing program, like Photoshop or Graphic Converter)

Credits :

Matias Ellert and the Open Source developers of the SANE project

Donate Button (all)

fixed : printer auto-install in Windows Vista won’t work

Question :

My HP DeskJet 930c prints colors if I print out the test page from the printer, but if I print from my Windows Vista PC, it only prints in grey-tones…

From the info on the HP website it has become clear to me that I have to reinstall the printer (and specifically the printer drivers) on Windows Vista.

But… according to HP the only way to reinstall the printer in Windows Vista using USB is to delete it from the Configuration Panel and then restart the PC and just plug in the printer and wait for Windows Vista to do the ‘magical’ auto-install…

The official HP instruction video can be found here :

http://bcove.me/4xavsoow

…and nothing happens when I do that.

And HP does not offer any other option… what can I do ?

 

Answer :

— DISCLAIMER —

This is purely a Windows problem, and this weblog is for Apple solutions only. I do have a solution that will probably work for you, and I’ve not found that solution posted online anywhere, so I will provide it to you here ‘as is’ (meaning NO guarantee, NO additional help and NO service) ! Try at your own risk ! If it doesn’t work for you : I’m sorry… please ask a Windows-specialist.

————————-

The solution is simple (and it’s unexplainable why HP doesn’t mention this anywhere) :

Just reinstall the printer the way you would have done it in Windows XP :

– delete any previous installs of the printer from the Configuration Panel

– install all (essential) available Windows Vista updates using Vista’s built-in Security Panel

– restart your PC

– connect the printer to your PC using a USB printer cable

– go to START-menu

– then to Configuration Panel

– then to Printers

– then choose Add Printer

– choose Virtual USB Port 1 (or 2) as the connection to be used

– choose your Printer

– choose the dedicated driver [*]

– and wait for the installing to finish

– test your printer using any (color) document you have available, if you don’t have any useable color document available, use this printer test-page :

https://macmanus.nl/2010/07/28/looking-for-a-good-test-page-to-test-your-pinter

– that should be it : enjoy !

[*] if no driver is available, download it from the following website, then install and start over with this procedure from the beginning :

http://www.driverguide.com

— DISCLAIMER —

This is purely a Windows problem, and this weblog is for Apple solutions only. I do have a solution that will probably work for you, and I’ve not found that solution posted online anywhere, so I will provide it to you here ‘as is’ (meaning NO guarantee, NO additional help and NO service) ! Try at your own risk ! If it doesn’t work for you : I’m sorry… please ask a Windows-specialist.

————————-

Old School Mac [3] : will my printer work with OSX ?

— THIS IS A REPOST FROM LONG WAY BACK ; JUST FOR ENTERTAINMENT — ORIGINALLY POSTED ON MACOSX.NL (a.k.a. ONE MORE THING) IN 2004

Question : Will I be able to use my WindowsPC’s printer on my new Mac ? Mine is a HP DeskJet 916.

Answer : Yes – the general rule is : any printer that you can connect to your OSX-Mac, will be useable (a least partially) from within OSX

About the meaning of “any printer that you can connect to your OSX-Mac” in the sentence above :

To connect a printer to a OSX-Mac, you need to connect it using a USB- or UTP/Ethernet-cable ; printers that can only be connected using a Parallel PC-printerport will therefore not do…

In this case it’s about a HP DeskJet 916 (HP calls it the “DJ916”) ; that one is included in the so-called DJ9xx-range… those ones are compatible with an OSX-Mac, but when using older versions of OSX you will probably need to use a ‘detour’ using the UNIX-base of OSX combined with the Linux-drivers by HP ; follow these links for more info :

http://www.allosx.com/1034107267/index_html http://hpinkjet.sourceforge.net/productssupported.php http://www.linuxprinting.org/tylerb/hpijs/

That last link is to the actual HPIJS for MacOSX, but be aware ! : do read the instructions and keep a copy of them for future reference before you do any install !

Note : using MacOSX 10.3 Panther your printer will be compatible if it is listed here :

http://www.apple.com/macosx/upgrade/printers.html

the original post(s) can be found here :

http://www.onemorething.nl/community/topic/hp-printer-op-mac