Tag Archives: Thunderbolt

tip : a more affordable alternative for the Apple Studio Display

Posted on by
1

Question :
I used to have an Apple Cinema Display and I loved it… I have had it for about 15 years, but recently it broke down… I tried to find someone or someway to repair it as I thought it could just be something simple, but since it’s so old there isn’t any warranty and no repair parts…
I will have to buy a replacement… but the current Apple Studio Display (from 2022) and the Apple Pro Display XDR are completely over-budget… since they cost at least €1.500…
I understand that some professional users might have a need for something like that, but for me, something a little more basic (and cheaper) would probably do just fine…

Is there any more affordable display that is especially suited for use with my Mac ?


Answer :
Yes, there is.
BenQ has released a display (in 2 different sizes) that is specially developed for allround use with a MacBook (or Mac mini) : MA270U and MA320U.
These are both 4K-screens (both 3840×2160 pixels, so no need for the 32″ if you are within 1m of the screen), and the rest of the specs are equal : tilt-able screen (90º rotation), adjustable stand, anti-reflective screen surface, 2x USB-C, 2x regular USB-A, 2x HDMI2.0, 2x 3W stereo speakers and a headphone-jack. One of the USB-C ports is 90W powered to allow for ‘single cable’ data & charging connection to a MacBook (Pro/Air). And using the FREE BenQ Diplay Pilot 2 software, you can clone, sync & adjust the display (and audio) settings from your MacBook (Pro/Air).

This is the download link for the Display Pilot 2 software.

The regular price of the 27″ version (MA270U) is €500, so check out below if you can get a better price on Amazon [we get a tiny fee if you buy anything using these links, but you will not be paying anything extra] :

BenQ 27″ Monitor for MacBook (MA270U) on Amazon US
BenQ 27″ Monitor for MacBook (MA270U) on Amazon UK
BenQ 27″ Monitor for MacBook (MA270U) on Amazon DE

The regular price of the 32″ version (MA320U) is €600, so check out below if you can get a better price on Amazon [we get a tiny fee if you buy anything using these links, but you will not be paying anything extra] :

BenQ 32″ Monitor for MacBook (MA320U) on Amazon US
BenQ 32″ Monitor for MacBook (MA320U) on Amazon UK
BenQ 32″ Monitor for MacBook (MA320U) on Amazon DE

Note 1 : as mentioned before, both of these screens are 4K, so you will not get more pixels (so no extra screen space), just bigger pixels (which some might even regard as a ‘less sharp’ picture…), so do you really want to pay €100 extra for that ?

Note 2 : using the BenQ DP1310 docking station, you can hook up 3 monitors with 4K-resolution simultaneously to any Silicon (M1/M2/M3) Mac.
(due to hardware limitations only Macs with the M1 Max, M2 Max and M3 Max cpu-versions can directly connect to more than 2 monitors with 4k-resolution simultaneously, find more retails on this here).

The regular price of the DP1310 Dock is ca. €300, so check out below if you can get a better price on Amazon [we get a tiny fee if you buy anything using these links, but you will not be paying anything extra] :

BenQ beCreatus DP1310 dock on Amazon US
BenQ beCreatus DP1310 dock on Amazon UK
BenQ beCreatus DP1310 dock on Amazon DE

Note 3 : the BenQ Display Pilot 2 software can also be used for other BenQ monitors :
EW2790U 
MA320U / MA270U 
RD240Q / RD280U / RD280UA / RD320U / RD320UA
PD3220U / PD2725U / PD3420Q / PD2706U / PD2706UA / PD2705U / PD2705UA / PD3205U / PD3205UA / PD2506Q / PD2705Q / PD3225U / PD3206U / PD2706QN
and the previous version of the Display Pilot software (version 1) is available for these BenQ monitors :
PD2500Q / PD2700Q / PD2700U / PD2720U / PD3200Q / PD3200U

enjoy 😉



fixed : how many 4K screens can my M1/M2/M3/M4 Mac handle simultaneously ?

Posted on by
Reply

Question :
I have an M3 MacBook that I would like to use with 2 external 4K monitors for my work setup, so I bought an extra 4K monitor, but when I tried to connect it to my MacBook, it didn’t work… What is wrong ?

How many displays can I connect to my M3 MacBook simultaneously ?


Answer :
There are hardware limitations to how many additional screens you can connect to a Silicon (M1/M2/M3/M4) Mac, and they are not the same for the basic M-version, the Pro-version and the Max-version. Actually, it’s quite confusing, because there’s also variation in what you can connect using either Thunderbolt or HDMI. Please find the number of external screens you can connect in the tables below [ warning ! the below may contain typos, do doublecheck on the official Apple website ] :

4K-resolutionover Thunderbolt onlyover Thunderbolt + HDMI
M1+1+1
M1 Pro+3+3
M1 Max+3+4
M2+1+1
M2 Pro+2+2
M2 Max+3+4
M3+2 (but only with lid closed)+2 (but only with lid closed)
M3 Pro+2+2
M3 Max+3+4
M4+2+2
M4 Pro+2+2
M4 Max+4+4
6K-resolutionover Thunderbolt onlyover Thunderbolt + HDMI
M1+1+1
M1 Pro+2+2
M1 Max+3+3
M2+1+1
M2 Pro+2+2 (but HDMI max. 4K)
M2 Max+3+4 (but HDMI max. 4K)
M3+2 (but 2nd max. 5K)+2 (but HDMI max. 4K)
M3 Pro+2+2 (but HDMI max. 4K)
M3 Max+3+4 (but HDMI max. 4K)
M4+2+2 (but HDMI max. 4K)
M4 Pro+2+2 (but HDMI max. 4K)
M4 Max+4 (daisy chaining needed)+4 (but HDMI max. 4K)
8K-resolutionover Thunderboltover Thunderbolt + HDMI
M1not possiblenot possible
M1 Pronot possiblenot possible
M1 Maxnot possiblenot possible
M2not possiblenot possible
M2 Pronot possible+1 (over HDMI only)
M2 Maxnot possible+1 (over HDMI only)
M3not possiblenot possible
M3 Pronot possible+1 (over HDMI only)
M3 Maxnot possible+1 (over HDMI only)
M4+1+1
M4 Pro+1+1
M4 Max+2+2

so… generally, all M1/M2/M3/M4 Macs can support at least one external 4K (or even 6K) screen, but if you want connect multiple external screens to your MacBook, you are probably goning to need a multi-monitor-hub, like the BenQ beCreatus DP1310 docking station.

The BenQ beCreatus DP1310 docking station will enable every silicon (M1/M2/M3/M4) MacBook to connect over USB-C to up to 3 external 4K screens (2 over HDMI and the 3rd over DP/DisplayPort).

The regular price of the DP1310 Dock is ca. €300, so check out below if you can get a better price on Amazon [we get a tiny fee if you buy anything using these links, but you will not be paying anything extra] :

BenQ beCreatus DP1310 dock on Amazon US
BenQ beCreatus DP1310 dock on Amazon UK
BenQ beCreatus DP1310 dock on Amazon DE

enjoy 😉

fixed : Ethernet cable connection on USB-C only MacBook Pro

Posted on by
Reply

Question :

I just bought a new MacBook Pro that has USB-C only (and WiFi & Bluetooth), nothing else… I would like to hook it up to an Ethernet-cable since I’ve heard that’s better than WiFi when playing games like Fortnite…

How do I do that ?

 

Answer :

To connect your MacBook to Ethernet using a UTP-cable, you need to have an adapter. You could use an USB-to-Ethernet-connector that you might have laying around and connect it to your MacBook using a cheap USB-to-USB-C-connector that you can get at a supermarket or discount-shop… but I would advise against that : all cheap USB-to-USB-C-connectors are USB2-only (because they are mainly for connecting USB-mouses and keyboards to modern computers)… and a lot of USB-to-Ethernet-connectors are 10/100-Ethernet compatible and USB2-only… but even if you have a USB3-to-Gigabit-Ethernet, the end result will be just USB2…

To get the best out of your MacBook, you should get a USB-C-to-Ethernet-connector that is Thunderbolt 3 compatible, like this one :

Thunderbolt 3 USB-C to Gigabit Ethernet connector (buy on Amazon US) (buy on Amazon UK) (buy on Amazon DE)

 

enjoy 😉

 

fixed : MacBook’s external monitor screen stays black

Posted on by
29

Question :

In my office, I am using an external monitor as my main screen for my MacBook Pro. Today, the screen didn’t respond when I connected my MacBook however : the screen stays black and nothing appears on-screen. So I opened up my MacBook and used the built-in screen to figure out what’s wrong, but so far I haven’t found any indication in the Displays Preference Panel that my MacBook even detects the second screen…

What can I do ?

 

Answer :

In such situations you should always do this first :

Remedy #1 :

  • if you are using a MacBook, MacBook Air or MacBook Pro, make sure you have the power adapter connected
  • if your laptop is on battery power, the external screen will go black whenever you close the lid of your laptop (when on battery power, all connections are powered off when you close the lid to save energy)

if this works, you’re good, if not, try Remedy #2

Remedy #2 :

  • make sure your monitor is switched ON
  • then hit the SPACE-bar on your external keyboard several times (maybe once, usually about 5 to 10 times…)
  • the monitor should now appear and show the inlog panel to unlock your screensaver
  • then login

if this works, you’re good, if not, try Remedy #3

NOTE : if you have a Benq monitor (especially the BL2420TP), try this first :

fixed : Benq monitor stays black when MacBook is switched on

Remedy #3 :

  • unplug all cables between the monitor and your Mac ( DisplayPort / Thunderbolt / HDMI / DVI / VGA  and also USB, UTP, FireWire and PowerAdapter )
  • shut down your monitor
  • shut down your MacBook
  • reconnect all cables and double-check if they’re properly connected on both the Mac and the monitor
  • switch on your MacBook
  • switch on your monitor

if this works, you’re good, if not, try Remedy #4

Remedy #4 :

  • on your MacBook, open Apple [main menu bar top-left] –> System Preferences
  • in the System Preferences window, select “Displays”
  • in the Display Preferences window, see if there is a button marked “Gather Windows” bottom right
  • if there is no “Gather Windows” button, press the ALT-key on your keyboard and a button marked “Detect Displays” appears ; click on it when it appears

if this works, you’re good, if not, try Remedy #5

Remedy #5 :

  • on your MacBook, open Apple [main menu bar top-left] –> System Preferences
  • in the System Preferences window, select “Displays”
  • in the Display Preferences window, see if there is a button marked “Gather Windows” bottom right
  • if there is a “Gather Windows” button, click on it
  • then you will see 2 Display Preference windows on your MacBook screen
  • select the Display Preference window that has 3 tabs on it marked “Display”, “Arrangement” and “Color” (not the window that has “Display” and “Color” only)
  • first, press the ALT-key on your keyboard and a button marked “Detect Displays” appears where the “Gather Windows”-button used to be ; click on it when it appears
  • if your monitor switches on, you’re good, if not…
  • click on the “Arrangement”-tab and in the next window put a checkmark at “Mirror Display”
  • if your monitor switches on now, uncheck the “Mirror Display” option again and close your MacBook… you should be good now…

if this didn’t work, try Remedy #6

Remedy #6 :

  • unplug all cables between the monitor and your Mac ( DisplayPort / Thunderbolt / HDMI / DVI / VGA  and also USB, UTP, FireWire and PowerAdapter )
  • shut down your monitor
  • shut down your MacBook
  • reconnect your Mac to your monitor using a different type of cable then you normally would choose (e.g. if you normally use a DisplayPort/Thunderbolt-cable, use an HDMI or DVI cable now)
  • switch on your MacBook
  • switch on your monitor
  • if your monitor wakes from sleep now, open Apple –> System Preferences
  • in the System Preferences window, select “Displays”
  • in the Display Preferences window, see if there is a button marked “Gather Windows” bottom right
  • if there is a “Gather Windows” button, click on it
  • then you will see 2 Display Preference windows on your MacBook screen
  • now, remove the monitor-cable that you have just used to connect your MacBook to your monitor
  • then, reconnect your MacBook to your monitor using all cables you normally use to connect the two
  • if your monitor now wakes from sleep, you’re good
  • if it doesn’t, restart your monitor
  • it that doesn’t help, restart your Mac

normally your issue should be resolved by now…

if still the monitor stays showing a back screen, I’m sorry to inform you that your screen probably has a hardware problem… if so, get an authorized Mac-repair-centre to fix it, get the Apple Store support-crew to fix this…

that’s it !

enjoy 😉

fixed : repair or replace broken 24″ Apple LED Display ?

Posted on by
Reply

Question :

Just a few hours ago, the 24″ Apple LED display that I have connected to my 13″ MacBook Pro (Late 2011) started smelling… the odor was giving me a headache as if something plastic or electrical was burning… now, my beloved Apple Display is not showing anything on screen anymore : even though it’s USB-ports, the MagSafe-power and the sound are still working, and my Mac still detects a connected external screen, the display stays black…

What can I do ?

 

Answer :

I’m sorry to bring you the bad news : your beloved Apple Display is a ‘total loss’… Even though this could probably be fixed by replacing the internal ‘motherboard’ of your monitor (99% chance some component on it burned, which is getting an increasingly common problem with these 8 year old monitors…), the fact that Apple does no longer supply any new components for these LED Displays makes that no official Apple repair station will do any repairs on it any longer, and even if you would be able to find a working second-hand replacement part, the replacement procedure is so delicate that it is not a do-it-yourself job… don’t go there.

So you want a replacement ?

Apple does no longer produce or sell any “Apple Display”-monitors. The only monitors available for sale on the Apple Store are LG-branded 4K and 5K monitors… these are said to be co-developed by Apple, but BEWARE : these can only be connected to the most recent Macs that have Thunderbold3-over-USB3 !!!

For older Macs that have miniDisplayPort or Thunderbold (which is Thunderbold1-over-miniDisplayPort) you need something else…

If you just need a plain ‘extra screen’ of GraphicDesigner-quality, you could choose any monitor by Dell, Acer, LG, Samsung, etc. that gets good reviews by graphic designers and meets these specs :

  • IPS-type screen (which has a far better viewing-angle then the TN-type screens)
  • miniDisplayPort, DisplayPort or DVI input (not HDMI-only)
  • a black and/or minimal bezel around the screen
  • preferably as much or more pixels than your Apple Display (the 24″ Apple Displays had 1920×1200 and the 27″ Apple Displays had 2560×1440)
  • preferably an internal USB-hub (to connect an external USB-keyboard, USB-mouse or USB-scanner)

…but for most of you, since you are still hanging on to your not-so-new MacBook, you will want an affordable replacement that will still be useful when you buy a new MacBook…

…then there is only one good option for you at this current time :

the BenQ BL2420PT monitor ; buy it at Amazon.com, Amazon.co.uk or Amazon.de

with a StarTech 4K@60Hz miniDisplayPort-to-DisplayPort1.2-cable ; buy it at Amazon.com, Amazon.co.uk or Amazon.de

BEWARE : there is no displayPort-cable included with the BL2420PT monitor, so don’t forget to add a 4K@60Hz capable miniDisplayPort1.2-cable

…okay, this is no way comparable to the sleek industrial design (the ‘box’) of your Apple Display… you won’t get MagSafe-power connection and an iSight webcam built-in, the screen is not high-gloss and it’s bezel is about .5cm thicker than the screen, the monitor speakers volume can’t be adjusted from your keyboard (you should do that on screen or use your Mac speakers) and you won’t get the ‘one cable’ connection you’re used to…

…but, it’s non-intrusive black, the screen can be easily adjusted in height and can even tilt to portrait, it has the 27″ amount of pixels on a 24″ screen (admitted : even though that’s a PRO for most, it might be a CON for some), it has built-in speakers, it has special settings for CAD/CAM and AnimationDesign and it’s the highest value-for-money around…

…if you would mind that, you wouldn’t still be using such an old MacBook… right 😉

enjoy !

Donate Button (MacManusNL)