tips : which affordable display is best for working from home with a MacBook Pro ?

Question :

I need to work from home and I am looking for an affordable display to hook up to my MacBook Pro, to make my work a little easier.

Do you have any recommendations ?

 

Answer :

When buying an external display and having only a few hundred euros of budget*, look at these specs mainly, and decide which order of priority they have in your specific case :

*= this is for people who do not have a budget of €500 or more

  1. HDMI or DisplayPort :
    • what ports does your MacBook (Air/Pro) have ?
      • if it has USB-C (or Thunderbolt 3) only, get a display with HDMI-input and get a USB-C-to-HDMI-cable that can handle 4K@60Hz
      • if it has a miniDisplayPort (or Thunderbolt 1 or 2) and regular sized USB-ports, get a display with DisplayPort(v1.2)-input and a get a miniDisplayPort-to-DisplayPort-cable
  2. number of pixels (is preferrred over screen size) :
    • in any home office or home schooling situation, you will not be more than 60cm away from your screen (note : the front of the screen will be about 10cm in front of the wall, because of the display stand) : so there’s no need for a huge screen :
      • when you are about 40cm from your screen, go for a 21″ to 24″ display
      • when you are about 50cm from your screen, go for a 24″ to 27″ display
    • any display with 1920×1080 (1K/HD) pixels or more will do just fine
      • 1920×1080 looks great on 21″ or 24″ 16:9 screen
      • but 1920×1080 looks fuzzy on a 27″ 16:9 screen
      • 2560×1080 looks okay on a 27″ wide screen
      • but 2560×1440 looks great on a 24″ 16:9 screen
  3. IPS display :
    • for home office work or home schooling, get an IPS display – it has better color representation and is easier on the eyes when using it for extended periods (hours and hours of continuous working)
    • for gaming, you might consider getting some other type of display, like TN, that enables you to get higher refresh rates for a tighter budget, but you shouldn’t use those for anything other than gaming
  4. refresh rate :
    • for home office work, a refresh rate of 5ms @60Hz is perfect
    • for gaming, get as close to 1ms @144Hz as your budget can afford (3ms @100Hz or 2ms @75Hz is okay for budget gaming)
  5. adjustable height (and orientation) :
    • because of ergonomics, it is important that you adjust the height to make sure top of the display is at the same height as your eyes when sitting straight up
    • because light reflection on the screen will be extremely annoying, make sure the display has the option to slightly tilt
    • only if you are working on a lot of text documents you will benefit from the option to twist the display’s orientation from landscape (regular) to portrait mode
  6. integrated multi-port USB3-hub :
    • this is an essential ! make sure that there is a USB-multipier in the display and that it’s USB3.0 or USB3.1 based
      • since there aren’t many USB-ports on your MacBook (Air/Pro), you will need extra USB-ports (especially if you have a USB-C MacBook (Air/Pro), since you will need one USB-C port to connect the screen)
      • a USB-port on your screen will enable you to connect a USB3-to-GigabitEthernet-adapter which will outperform your WiFi connection, and your MacBook (Air/Pro) will instantaneously be connected to fast wired internet the moment you connect it to your display
    • 2 extra USB-ports on the Display is the bear minimum : you should prefer 4 or more USB-ports, so you can connect these if you need to :
      • a USB-mouse
      • a USB-keyboard
      • a USB-to-Ethernet adapter (preferably USB3-to-GigabitEthernet)
      • a USB-printer
      • a USB-scanner
      • a USB-flashcardreader (for photo camera memory cards)
      • a USB-to-TV adapter (e.g. an EyeTV stick, to watch picture-in-picture TV)
      • connect or charge your iPhone or iPad
      • an external harddrive or backup drive
    • for a keyboard or mouse (or even a wired joystick/joypad) you don’t really need a USB3.0 or USB3.1 connection, but for data transfer it will save you a lot of time
  7. price :
    • do not go for ‘lowest budget’ if you need to use the display for working from home or home schooling, find a display for €200 to €250 : even though you cheaper displays are available, do not buy any display that was under €200 when released : most of the time, you will be better of getting a slightly older (up to 3 years) display model that used to cost €300 or more
      • make sure you also take into account the extra headphone, sound system, ethernet-adapter, mouse, keyboard and alike when deciding on your budget for the display
  8. integrated webcam :
    • if you need to do video-conferencing, make sure you get a webcam with your display – an integrated webcam will turn out to be very convenient (an integrated webcam cannot compete with a high-quality webcam, but if you use an external webcam, make sure to get a display with a USB3-hub with enough ports in your display)
      • added bonus of most integrated webcams is that de webcam is either pop-up or slide-to-open, so you can easily prevent being ‘accidentally’ exposed to webcam viewers
      • make sure the integrated webcam is 1.2 megapixel (1.2MP) or more : the FaceTime HD webcam that is built into a MacBook is at least 1.2MP (in an iPhone X the selfie camera is even 7MP)
  9. integrated microphone :
    • if you have the need for a webcam on your display, make sure you also have a microphone – an integrated microphone will turn out to be very convenient (an integrated microphone cannot compete with a headphone with integrated microphone, a gaming headphone or a separate directional of voice microphone)
  10. integrated speakers :
    • most displays do not have integrated speakers, but having the option to watch home schooling lessons or YouTube-videos without a headphone are very convenient, even though audio quality of most integrated speakers is okay but not impressive (if you do not already have an audio systemconnected to your MacBook, these integrated speakers might even turn out to be essential)
  11. bezel thickness :
    • the bezel (the edge around the actual screen) is really important if you want to set multiple displays side-by-side, but most of the time it is only a matter of taste in design : about 15mm is okay, especially if the display will be placed in front of a distracting environment (like a window, fancy wallpaper or a hallway)

Note : make sure you also think about these :

  • you need to use an external keyboard and mouse (or trackpad) :
    • any mouse or keyboard that suits you will do, so if you have an old mouse and even keyboard around, use those
      • for work, USB, Bluetooth and RF (wireless connection from a dedicated USB-to-wireless-plug) will all do
      • for gaming, only USB is advisory as any wireless connection might get laggy during intensive use
    • if you need to buy a new keyboard, think about these :
      • get a ‘Designed for Mac’ keyboard with the Mac key-layout, so with a COMMAND/CMD-key (and not a WINDOWS-key : only if you can typ blindly without any restrictions, you can get a Windows-layout keyboard and remap the keys in macOS)
      • get a keyboard that suits your main language : usually that is a QWERTY-layout, but for French it is AZERTY-layout and for German it is QWERTZ-layout (this will also help when you need to use accents in texts)
      • if you need to typ a lot, get a keyboard mechanical keys and spacing between all keys
      • if you need to input a lot of numbers (if you’re in accounting or working with Excell sheets) get a full-size keyboard with an integrated numeric pad (on the right of the keyboard)
      • a keyboard with an integrated trackpad can be beneficial for some, but make sure you get one with a Mac key-layout
      • an ergonomic keyboard can be really beneficial, but there are very few ergonomic keyboards with a Mac key-layout
    • if you need to buy a new mouse, think about these :
      • a mouse with a right and left button and a scroll-option will do for most purposes
        • most people have no need for a fancy gaming mouse with more than these 3 functions
      • consider using a trackball or ergonomic mouse
      • a Bluetooth or RF-wireless mouse does have downsides :
        • it will need to be charged (Apple’s Magic Mouse 2 is problematic in this respect…)
        • it easily gets lost
        • when the battery is down, you will need to open your MacBook and use the built-in trackpad until the mouse is recharged
    • if you need to buy both a new mouse and a new keyboard, have a look at the mouse & keyboard combo offerings by renowned brands like Logitech,
  • make sure your MacBook (Air/Pro) has it’s power adapter plugged in when using an external display, else you cannot use your display with the MacBook’s lid closed and your MacBook will quickly run out of battery
  • if your MacBook has USB-C (Thunderbolt 3) ports, and your Display doesn’t have a built-in multi-port USB3-hub, consider getting a USB-C Docking-hub
  • if your MacBook has regular USB ports, and your Display doesn’t have a built-in multi-port USB3-hub, consider getting yourself an additional USB3-hub
  • if your mouse is on a very reflective surface (like a glass table) or a wobbly surface (like a rustic wooden table), your mouse will not work reliably, so it is advisory to use a mouse mat (or a plastic placemat or even a sturdy-covered magazine)
  • to minimize the clutter of cables, you can use a cable hose to keep your cables together (budget option : use tie-ribs, or even ‘the pieces of plastic covered metal wire’ that you get with nearly every cable or electronic device you buy, to tie your cables together)

 

Some suggestions (no single display is optimal on all requirements) :

for office & graphic work : BenQ BL2420PT display : 23.8″ / 16:9 / 2560×1440 (2K/QHD) / 5ms / 60Hz / IPS / HDMI v1.4 & DisplayPort v1.2 / adjustable height & orientation / 2x USB2.0 out / no webcam / 2x 1W stereo-speakers / audio minijack out / 15mm bezel

for videoconferencing & office work : Philips B-line 241B7QPJKEB / 23.8″ / 16:9 / 1920×1080 (1K/HD) / 5ms / 60Hz / IPS / HDMI v1.4 & DisplayPort v1.2 / adjustable height & orientation / 3x USB3.0 out / pop-up 2MP webcam / 2W stereo-speakers / audio minijack out / 2mm bezel

for gaming : BenQ Zowie XL2411P display : 24″ / 16:9 / 1920×1080 (1K/HD) / 1ms / 144Hz / TN / HDMI & DisplayPort v1.2 / adjustable height & orientation / no USB out / no webcam / no speakers / audio minijack out / 15mm bezel

miniDisplayPort cable : Rankie miniDP-to-DP-cable : miniDisplayPort in / DisplayPort out / up to 4K/UltraHD (3840×2160)

USB-C to HDMI cable : Uni USB-C HDMI cable : USB-C in / HDMI out / up to 4K/UltraHD @60Hz (3840×2160)

USB3.0-to-Ethernet-adapter : TP-Link UE300 Gigabit LAN adapter : USB3.0 / RJ45 LAN / Gigabit (10/100/1000Mbps) Ethernet

USB-C-to-GigabitEthernet-adapter : AmazonBasics USB-C Gigabit LAN adapter : USB-C / RJ45 LAN / Gigabit (10/100/1000Mbps) Ethernet

USB2.0-to-Ethernet-adapter : TP-Link UE200 LAN adapter : USB2.0 / RJ45 LAN / 10/100Mbps Ethernet

USB3-hub : Vogek 6 port USB3.0 hub : powered hub / 6x USB3.0 out

office keyboard : Logitech K380 keyboard : full-size keys / wireless RF & Bluetooth / no numeric pad / macOS printing on-key / no trackpad

high-end office & design keyboard : Logitech MX keyboard : full-size keys / wireless RF & Bluetooth / numeric pad / macOS printing on-key / no trackpad

keyboard with trackpad : Logitech K400 Livingroom keyboard : full-size keys / wireless RF & Bluetooth / no numeric pad / no macOS printing on-key / trackpad

ergonomic mouse mat : Comfort Gel Wrist Support Mouse Pad

cable hose : Neoprene Cable Tube

 

 

Advertisement

fixed : how to connect an external display (or iMac) to my new USB-C only MacBook Pro ?

Question :

I have to work from home right now, so I would like to connect my MacBook Pro to an external display, but I have a new MacBook Pro that only has USB-C ports…

How do I do that ?

 

Answer :

First, you need to know if your MacBook, MacBook Air or MacBook Pro has Thunderbolt 3  (TB3) or regular USB-C.  Thunderbolt 3 (TB3) and regular USB-C (USB 3.1 gen 2) connectors look exactly the same, but Thunderbolt 3 (TB3) runs at 40Gbps instead of 10Gbps for regular USB-C. Thunderbolt 3 (TB3) can handle a 5K-display or two 4K-displays at once, but regular USB-C can only handle one 4K-display.

The 12″ MacBooks from 2015/2016/2017 have regular USB-C (just like the iPad Program 2018/2020) that is NOT Thunderbolt 3 (TB3) capable

The MacBook Air from 2018/2020 and the MacBook Pro’s from 2017 and newer have Tunderbolt 3 (TB3)

Then, you will need a display-connector-cable that converts USB-C to something that your monitor can handle :

If your external screen is a 4K- or 5K-display with USB-C/Thunderbolt 3-input, use this cable (or something similar) :

Thunderbolt 3 to Thunderbolt 3 cable  [ buy from Amazon USA, Amazon UK, Amazon DE ]

If your external screen has an HDMI-input (e.g. if it’s a recent display or if it’s a TV), use this cable (or something similar) :

USB-C 4K@60Hz to HDMI cable  [ buy from Amazon USA, Amazon UK, Amazon DE ]

If your external screen has a DVI-input (e.g. if it’s a slightly older or more expensive display), use this cable (or something similar) :

USB-C to DVI cable  [ buy from Amazon USA, Amazon UK, Amazon DE ]

If your external screen has a DisplayPort-input (e.g. if it’s a slightly older or more professional display), use this cable (or something similar) :

USB-C to DisplayPort cable  [ buy from Amazon USA, Amazon UK, Amazon DE ]

If your external screen had a MiniDisplayPort-input (e.g. if it’s an old iMac with Target Display Mode* support), use this cable (or something similar) :

  • * = only few iMacs have Target Display Mode support :
    • iMac 27″ 2009 to iMac 27″ 2014 (MiniDisplayPort/Thunderbolt 1)
    • iMac 21,5″ 2011 to iMac 21,5″ 2014 (MiniDisplayPort/Thunderbolt 1)
    • note : iMac Retina 4K and iMac Retina 5K do not have support for Target Display Mode !
    • visit the Apple website for more info on Target Display Mode
    • newer iMacs can be used as an external screen using Wireless Screen Sharing when connected to the same WiFi network, but that could be laggy (where cabled Target Disk Mode will never have lag)

USB-C to MiniDisplayPort cable  [ buy from Amazon USA, Amazon UK, Amazon DE ]

If your external screen has a VGA-input (e.g. if it’s a really old computer monitor or a beamer), use this converter (or something similar) to connect to a regular VGA-cable :

USB-C to VGA adapter  [ buy from Amazon USA, Amazon UK, Amazon DE ]

 

When you have gotten hold of the right connection cable, do this :

  • shut down both your MacBook* and external display**
    • * = MacBook, MacBook Air or MacBook Pro that only has USB-C or Thunderbolt 3 ports
    • ** = external display, iMac or beamer
  • connect your MacBook* to your external display** using the proper cable mentioned above
  • switch on your external display**
  • switch on your MacBook*
  • make sure your MacBook* is connected to the wall power adapter
  • connect a mouse and keyboard to your MacBook** either using USB (with a USB-to-USB-C connector) or using Bluetooth
    • any basic USB-to-USB-C connector will do, here is a suggestion
    • if your MacBook* only has 2 USB-C ports, you either need to use a Bluetooth mouse & keyboard, or your need a USB-C port hub (port multiplier) like this :
  • if your external display** has various input options, make sure it is set to receive the input from your MacBook*
  • then, close your MacBook*’s lid, so your entire desktop screen will be visible on the external screen
  • usually, the macOS Display Preferences window will now be on-screen, if it is not, open the System Preferences (in the Apple-menu top left) and click on the Displays-icon to open it
  • in the Preferences window that is named like your external display, click on the Display-tab
  • then choose ‘Default for display’ (if you click on ‘Scaled’ once, you will see that macOS has automatically chosen the optimal resolution for your this external display** with your MacBook*, if that is not the maximum screen resolution listed, you might want to change this, but usually you just choose ‘Default for display’)
  • now you are good to go…

That’s it !

enjoy 😉

 

fixed : using a Nintendo Switch on an HD-ready TV without HDMI-input

———————————

the solution outlined below is your best option for all devices that have an HDMI port as their best or only video output, including (but not limited to) gaming consoles like Playstation PS3/PS4, Xbox 360 & Xbox One, Nintendo Switch & Wii-U and all versions of AppleTV

———————————

Question :

I just bought a Nintendo Switch gaming console and I want to connect it to my old flatscreen 26″ LCD-TV that doesn’t have HDMI.

Even tough the TV is able to display HD-video up to 1080i and computer-display resolutions up to 1280×768 pixels at 60Hz, it does not have an HDMI input, neither a digital audio input (a.k.a. “Toslink”).

The only input options are :

– DVI digital video + 3.5mm (a.k.a. “jack”) analog audio

– VGA analog video + 3.5mm (a.k.a. “jack”) analog audio

– Component YPbPr analog video + stereo analog audio (5 plugs, a.k.a. “RCA” or “tulip” or “chinch”)

– S-video analog video (S-video plug) + stereo analog audio (a.k.a. “RCA” or “tulip” or “chinch”)

– SCART analog video + audio (SCART plug)

How do I connect my Nintendo Switch to this TV-set ?

 

Answer :

Even though it might seem the most obvious to connect the Nintendo Switch’s HDMI-output to the TV’s DVI-input, since HDMI and DVI are 100% video-compatible, this comes with 2 problems :

– DVI has no audio, so you will have to connect the audio separately ; in this case that would require a DAC (digital-analog-converter) for your audio since your TV has no digital audio input

– DVI does not support HDCP-encryption as HDMI does, so any ‘copyright-protected’ HDMI content will be blocked when connected to DVI…

So… do not try to use the DVI-input, but use the Component YPbPr connection, especially since the digital-to-analog video-conversion gets rid of the HDCP-limitations for you also !

This converter cable is the most elegant option that will do the trick for you :

LogiLink HDMI to YPbPr & Audio Converter Cable (2m) [Amazon.com]

LogiLink HDMI to YPbPr & Audio Converter Cable (2m) [Amazon.co.uk]

LogiLink HDMI to YPbPr & Audio Converter Cable (2m) [Amazon.de]

…it turns out that the HDMI-output of the Nintendo Switch is supplying enough power to  power the built-in converter, so you don’t need to connect the USB-power cable.

Donate Button (MacManusNL)

 

If you have an HD-Ready flatscreen TV and you want to connect an AppleTV or a gaming console (Nintendo Wii-U, Nintendo Switch, Playstation PS3/PS4, Xbox One or Xbox 360), your best option is to use the HDMI-to-YPbPr converter-cable mentioned above.

But… in some cases these might also be interesting :

An HDMI-to-VGA&stereo converter-cable :

LogiLink HDMI to VGA & Audio Converter Cable (2m) [Amazon.com]

LogiLink HDMI to VGA & Audio Converter Cable (2m) [Amazon.co.uk]

LogiLink HDMI to VGA & Audio Converter Cable (2m) [Amazon.de]

An HDMI-to-HDMI&stereo converter-cable : [so this splits the audio from the HDMI-video signal and converts it into a separate analog stereo (2x RCA) signal, but beware that the output video signal is 720p, 1080p and 1080i only, which is problematic for most HD-ready flatscreen TVs, especially when combined with an HDMI-to-DVI converter] :

LogiLink HDMI to HDMI & Analog Audio Converter Cable (2m) [Amazon.co.uk]

LogiLink HDMI to HDMI & Analog Audio Converter Cable (2m) [Amazon.de]

fixed : MacBook’s external monitor screen stays black

Question :

In my office, I am using an external monitor as my main screen for my MacBook Pro. Today, the screen didn’t respond when I connected my MacBook however : the screen stays black and nothing appears on-screen. So I opened up my MacBook and used the built-in screen to figure out what’s wrong, but so far I haven’t found any indication in the Displays Preference Panel that my MacBook even detects the second screen…

What can I do ?

 

Answer :

In such situations you should always do this first :

Remedy #1 :

  • if you are using a MacBook, MacBook Air or MacBook Pro, make sure you have the power adapter connected
  • if your laptop is on battery power, the external screen will go black whenever you close the lid of your laptop (when on battery power, all connections are powered off when you close the lid to save energy)

if this works, you’re good, if not, try Remedy #2

Remedy #2 :

  • make sure your monitor is switched ON
  • then hit the SPACE-bar on your external keyboard several times (maybe once, usually about 5 to 10 times…)
  • the monitor should now appear and show the inlog panel to unlock your screensaver
  • then login

if this works, you’re good, if not, try Remedy #3

NOTE : if you have a Benq monitor (especially the BL2420TP), try this first :

fixed : Benq monitor stays black when MacBook is switched on

Remedy #3 :

  • unplug all cables between the monitor and your Mac ( DisplayPort / Thunderbolt / HDMI / DVI / VGA  and also USB, UTP, FireWire and PowerAdapter )
  • shut down your monitor
  • shut down your MacBook
  • reconnect all cables and double-check if they’re properly connected on both the Mac and the monitor
  • switch on your MacBook
  • switch on your monitor

if this works, you’re good, if not, try Remedy #4

Remedy #4 :

  • on your MacBook, open Apple [main menu bar top-left] –> System Preferences
  • in the System Preferences window, select “Displays”
  • in the Display Preferences window, see if there is a button marked “Gather Windows” bottom right
  • if there is no “Gather Windows” button, press the ALT-key on your keyboard and a button marked “Detect Displays” appears ; click on it when it appears

if this works, you’re good, if not, try Remedy #5

Remedy #5 :

  • on your MacBook, open Apple [main menu bar top-left] –> System Preferences
  • in the System Preferences window, select “Displays”
  • in the Display Preferences window, see if there is a button marked “Gather Windows” bottom right
  • if there is a “Gather Windows” button, click on it
  • then you will see 2 Display Preference windows on your MacBook screen
  • select the Display Preference window that has 3 tabs on it marked “Display”, “Arrangement” and “Color” (not the window that has “Display” and “Color” only)
  • first, press the ALT-key on your keyboard and a button marked “Detect Displays” appears where the “Gather Windows”-button used to be ; click on it when it appears
  • if your monitor switches on, you’re good, if not…
  • click on the “Arrangement”-tab and in the next window put a checkmark at “Mirror Display”
  • if your monitor switches on now, uncheck the “Mirror Display” option again and close your MacBook… you should be good now…

if this didn’t work, try Remedy #6

Remedy #6 :

  • unplug all cables between the monitor and your Mac ( DisplayPort / Thunderbolt / HDMI / DVI / VGA  and also USB, UTP, FireWire and PowerAdapter )
  • shut down your monitor
  • shut down your MacBook
  • reconnect your Mac to your monitor using a different type of cable then you normally would choose (e.g. if you normally use a DisplayPort/Thunderbolt-cable, use an HDMI or DVI cable now)
  • switch on your MacBook
  • switch on your monitor
  • if your monitor wakes from sleep now, open Apple –> System Preferences
  • in the System Preferences window, select “Displays”
  • in the Display Preferences window, see if there is a button marked “Gather Windows” bottom right
  • if there is a “Gather Windows” button, click on it
  • then you will see 2 Display Preference windows on your MacBook screen
  • now, remove the monitor-cable that you have just used to connect your MacBook to your monitor
  • then, reconnect your MacBook to your monitor using all cables you normally use to connect the two
  • if your monitor now wakes from sleep, you’re good
  • if it doesn’t, restart your monitor
  • it that doesn’t help, restart your Mac

normally your issue should be resolved by now…

if still the monitor stays showing a back screen, I’m sorry to inform you that your screen probably has a hardware problem… if so, get an authorized Mac-repair-centre to fix it, get the Apple Store support-crew to fix this…

that’s it !

enjoy 😉

fixed : using the AppleTV on an HD-ready TV without HDMI-input

———————————————–

update : this solution should also work for the new 4th generation AppleTV (2015)

———————————————–

Question :

I just bought an AppleTV 3 and I want to connect it to my flatscreen 26″ LCD-TV, a MyCom MC2600LT (it’s actually a rebranded/white-label DT-3003X which has internationally also been sold under the Daewoo and Grundig Xentia brand, and probably more).

Even tough the TV is able to display HD-video up to 1080i and computer-display resolutions up to 1280×768 pixels at 60Hz, it does not have an HDMI input, neither a digital audio input (a.k.a. “Toslink”).

The only input options are :

– DVI digital video + 3.5mm (a.k.a. “jack”) analog audio

– VGA analog video + 3.5mm (a.k.a. “jack”) analog audio

– Component YPbPr analog video + stereo analog audio (5 plugs, a.k.a. “RCA” or “tulip” or “chinch”)

– S-video analog video (S-video plug) + stereo analog audio (a.k.a. “RCA” or “tulip” or “chinch”)

– SCART analog video + audio (SCART plug)

How do I connect my AppleTV 3 to this TV-set ?

 

Answer :

Even though it might seem the most obvious to connect the AppleTV’s HDMI-output to the TV’s DVI-input, since HDMI and DVI are 100% video-compatible, this comes with 2 problems :

– DVI has no audio, so you will have to connect the audio separately ; in this case that would require a DAC (digital-analog-converter) for your audio since your TV has no digital audio input

– DVI does not support HDCP-encryption as HDMI does, so any ‘copyright-protected’ HDMI content will be blocked when connected to DVI…

So… do not try to use the DVI-input, but use the Component YPbPr connection, especially since the digital-to-analog video-conversion gets rid of the HDCP-limitations for you also !

This converter cable is the most elegant option that will do the trick for you :

LogiLink HDMI to YPbPr & Audio Converter Cable (2m) [Amazon.com]

LogiLink HDMI to YPbPr & Audio Converter Cable (2m) [Amazon.co.uk]

LogiLink HDMI to YPbPr & Audio Converter Cable (2m) [Amazon.de]

…it turns out that the HDMI-output of the AppleTV 3 is supplying enough power to  power the built-in converter, so you don’t need to connect the USB-power cable.

Donate Button (MacManusNL)

For anyone interested, here’s a link to the Dutch manual of the 26″ MyCom LCD-TV MC2600LT (a.k.a. DT-3003X) :

manual MyCom LCD tv

——————————

If you have an HD-Ready flatscreen TV and you want to connect an AppleTV, your best option is to use the HDMI-to-YPbPr converter-cable mentioned above.

But… in some cases these might also be interesting :

An HDMI-to-VGA&stereo converter-cable :

LogiLink HDMI to VGA & Audio Converter Cable (2m) [Amazon.com]

LogiLink HDMI to VGA & Audio Converter Cable (2m) [Amazon.co.uk]

LogiLink HDMI to VGA & Audio Converter Cable (2m) [Amazon.de]

An HDMI-to-HDMI&stereo converter-cable : [so this splits the audio from the HDMI-video signal and converts it into a separate analog stereo (2x RCA) signal, but beware that the output video signal is 720p, 1080p and 1080i only, which is problematic for most HD-ready flatscreen TVs, especially when combined with an HDMI-to-DVI converter] :

LogiLink HDMI to HDMI & Analog Audio Converter Cable (2m) [Amazon.co.uk]

LogiLink HDMI to HDMI & Analog Audio Converter Cable (2m) [Amazon.de]