fixed : USB-to-Ethernet-adapter not working on Nintendo Switch

Question :

I would prefer to connect our new Nintendo Switch gaming console to the Internet using a cable, as I did with our Nintendo Wii-U. But the USB-to-Ethernet-adapter that was working perfectly on our Wii-U isn’t even recognized by the new Nintendo Switch.

What is wrong ?

 

Answer :

There are 2 sides to this problem, and you might even have to take care of both :

-1-

To use a wired ethernet-connection on the Nintendo Switch, you need to keep the Switch tablet inside the base station. If the tablet isn’t inside the base station, the Switch can’t access the wired ethernet-connection, as there is no wireless connection between the tablet and the base station. Even when docked in the base station, it is the Switch tablet that connects to WiFi directly. There is no WiFi-module inside the base station.

So, follow these steps to get it to work :

  • open the lid on the back of the base station and unplug the power adapter-cable
  • make sure the ethernet-cable is connected to your modem router
  • plug the ethernet-cable into your USB-to-Ethernet-adapter
  • plug the USB-to-Ethernet-adapter into the base station (preferably the USB-port under the lid on the back, as that is a USB3-port)
  • then replug the power adapter-cable into the base station and close the lid
  • then put the Switch tablet into the base station and turn on your TV
  • Go to Settings, then Internet, then Test Connection
  • If the info listed says “Wired Connection” you’re okay and your Internet connection speed will be displayed in a few seconds
  • If not, repeat the above steps and make sure all cables are plugged in properly

-2-

The Nintendo Switch gaming console will only accept USB-to-Ethernet-adapters that are based on the ASIX AX88179 chipset. The only officially supported USB-to-Ethernet-adapter is the Hori NSW-004U Switch LAN Adapter, but any adapter based on the ASIX AX88179 chipset should work perfectly.

buy the officially supported Hori Switch LAN Adapter on Amazon.com here

buy the officially supported Hori Switch LAN Adapter on Amazon.co.uk here

buy the officially supported Hori Switch LAN Adapter on Amazon.de here

Or you can spare yourself some money by buying one of these (note that these are all USB3, which makes them a cheaper and faster alternative to the Hori-adapter that is only USB2) :

buy the alternatively TRENDnet USB3 Wired Network Adapter on Amazon.com here

buy the alternatively uGREEN USB3 Gigabit Network Adapter on Amazon.co.uk here

buy the alternatively Plugable USB3-E1000 Adapter on Amazon.de here

 

enjoy 😉

Advertisements

fixed : using a Nintendo Switch on an HD-ready TV without HDMI-input

———————————

the solution outlined below is your best option for all devices that have an HDMI port as their best or only video output, including (but not limited to) gaming consoles like Playstation PS3/PS4, Xbox 360 & Xbox One, Nintendo Switch & Wii-U and all versions of AppleTV

———————————

Question :

I just bought a Nintendo Switch gaming console and I want to connect it to my old flatscreen 26″ LCD-TV that doesn’t have HDMI.

Even tough the TV is able to display HD-video up to 1080i and computer-display resolutions up to 1280×768 pixels at 60Hz, it does not have an HDMI input, neither a digital audio input (a.k.a. “Toslink”).

The only input options are :

– DVI digital video + 3.5mm (a.k.a. “jack”) analog audio

– VGA analog video + 3.5mm (a.k.a. “jack”) analog audio

– Component YPbPr analog video + stereo analog audio (5 plugs, a.k.a. “RCA” or “tulip”)

– S-video analog video (S-video plug) + stereo analog audio (a.k.a. “RCA” or “tulip”)

– SCART analog video + audio (SCART plug)

How do I connect my Nintendo Switch to this TV-set ?

 

Answer :

Even though it might seem the most obvious to connect the Nintendo Switch’s HDMI-output to the TV’s DVI-input, since HDMI and DVI are 100% video-compatible, this comes with 2 problems :

– DVI has no audio, so you will have to connect the audio separately ; in this case that would require a DAC (digital-analog-converter) for your audio since your TV has no digital audio input

– DVI does not support HDCP-encryption as HDMI does, so any ‘copyright-protected’ HDMI content will be blocked when connected to DVI…

So… do not try to use the DVI-input, but use the Component YPbPr connection, especially since the digital-to-analog video-conversion gets rid of the HDCP-limitations for you also !

This converter cable is the most elegant option that will do the trick for you :

LogiLink HDMI to YPbPr & Audio Converter Cable (2m) [Amazon.com]

LogiLink HDMI to YPbPr & Audio Converter Cable (2m) [Amazon.co.uk]

LogiLink HDMI to YPbPr & Audio Converter Cable (2m) [Amazon.de]

…it turns out that the HDMI-output of the Nintendo Switch is supplying enough power to  power the built-in converter, so you don’t need to connect the USB-power cable.

Donate Button (MacManusNL)

 

If you have an HD-Ready flatscreen TV and you want to connect an AppleTV or a gaming console (Nintendo Wii-U, Nintendo Switch, Playstation PS3/PS4, Xbox One or Xbox 360), your best option is to use the HDMI-to-YPbPr converter-cable mentioned above.

But… in some cases these might also be interesting :

An HDMI-to-VGA&stereo converter-cable :

LogiLink HDMI to VGA & Audio Converter Cable (2m) [Amazon.com]

LogiLink HDMI to VGA & Audio Converter Cable (2m) [Amazon.co.uk]

LogiLink HDMI to VGA & Audio Converter Cable (2m) [Amazon.de]

An HDMI-to-HDMI&stereo converter-cable : [so this splits the audio from the HDMI-video signal and converts it into a separate analog stereo (2x RCA) signal, but beware that the output video signal is 720p, 1080p and 1080i only, which is problematic for most HD-ready flatscreen TVs, especially when combined with an HDMI-to-DVI converter] :

LogiLink HDMI to HDMI & Analog Audio Converter Cable (2m) [Amazon.co.uk]

LogiLink HDMI to HDMI & Analog Audio Converter Cable (2m) [Amazon.de]