fixed : USB-to-Ethernet-adapter not working on Nintendo Switch

Question :

I would prefer to connect our new Nintendo Switch gaming console to the Internet using a cable, as I did with our Nintendo Wii-U. But the USB-to-Ethernet-adapter that was working perfectly on our Wii-U isn’t even recognized by the new Nintendo Switch.

What is wrong ?

 

Answer :

There are 2 sides to this problem, and you might even have to take care of both :

-1-

To use a wired ethernet-connection on the Nintendo Switch, you need to keep the Switch tablet inside the base station. If the tablet isn’t inside the base station, the Switch can’t access the wired ethernet-connection, as there is no wireless connection between the tablet and the base station. Even when docked in the base station, it is the Switch tablet that connects to WiFi directly. There is no WiFi-module inside the base station.

So, follow these steps to get it to work :

  • open the lid on the back of the base station and unplug the power adapter-cable
  • make sure the ethernet-cable is connected to your modem router
  • plug the ethernet-cable into your USB-to-Ethernet-adapter
  • plug the USB-to-Ethernet-adapter into the base station (preferably the USB-port under the lid on the back, as that is a USB3-port)
  • then replug the power adapter-cable into the base station and close the lid
  • then put the Switch tablet into the base station and turn on your TV
  • Go to Settings, then Internet, then Test Connection
  • If the info listed says “Wired Connection” you’re okay and your Internet connection speed will be displayed in a few seconds
  • If not, repeat the above steps and make sure all cables are plugged in properly

-2-

The Nintendo Switch gaming console will only accept USB-to-Ethernet-adapters that are based on the ASIX AX88179 chipset. The only officially supported USB-to-Ethernet-adapter is the Hori NSW-004U Switch LAN Adapter, but any adapter based on the ASIX AX88179 chipset should work perfectly.

buy the officially supported Hori Switch LAN Adapter on Amazon.com here

buy the officially supported Hori Switch LAN Adapter on Amazon.co.uk here

buy the officially supported Hori Switch LAN Adapter on Amazon.de here

Or you can spare yourself some money by buying one of these (note that these are all USB3, which makes them a cheaper and faster alternative to the Hori-adapter that is only USB2) :

buy the alternatively TRENDnet USB3 Wired Network Adapter on Amazon.com here

buy the alternatively uGREEN USB3 Gigabit Network Adapter on Amazon.co.uk here

buy the alternatively Plugable USB3-E1000 Adapter on Amazon.de here

 

enjoy 😉

Advertisements

tip : which scanners are compatible with OSX 10.9 Mavericks ?

Question :

Which scanners will work with OSX 10.9 Mavericks ?

Answer :

Just like with previous versions of MacOSX, the built-in compatibility with older scanners is rather low…

…in the specs of OSX 10.9 Mavericks there isn’t any indication of extended scanner support, so it is expected that “wireless scanning” (over WiFi/AirPort) isn’t supported either, just as was the case (or should I say “problem”) in previous versions of MacOSX…

Apple hasn’t published a list of pre-installed scanner-drivers either, so there’s nothing official on this…

…there is however, a (very short) list of supported scanners pre-installed in OSX 10.9 Mavericks itself :

CanoScan 5600F             find it in the US, UK or Germany
CanoScan 9000F             find it in the US, UK or Germany
CanoScan LiDE 100         find it in the US or Germany
CanoScan LiDE 110         find it in the US, UK or Germany
CanoScan LiDE 200         find it in the US, UK or Germany
CanoScan LiDE 210         find it in the US, UK or Germany
CanoScan LiDE 700F       find it in the US, UK or Germany

This list can be found in :

/Library/Printers/Canon/IJScanner/Resources/CIJIcons

…strangely, there are no such icons installed for scanners from other brands like EPSON and HP… so support for those scanners is either not included (yet) or left up to the individual manufacturers…

NOTE #1 : in MacOSX 10.7 Lion, OSX 10.8 Mountain Lion and OSX 10.9 Mavericks scanner-compatibilty can be extended by installing the SANE-scannerdrivers, as outlined here.

NOTE #2 : if you are a professional and/or heavy user, you could also try using the SilverFast 8 scanner-suite, which adds support for these scanners to OSX 10.9 Mavericks (since even the cheapest version, SilverFast SE 8, will cost you €50, this only is a relevant solution for professional and/or heavy users…)

Donate Button (MacManusNL)

fixed : what’s the location of Apple’s official Mac icons in OSX ?

Question :

I want to change the icon of my hard drive into an icon-sized picture of my Mac.

How do I do that ?

Answer :

For (nearly) every model of Mac, iPhone, iPad & iPod, the ‘official’ icon is already included inside OSX. If you want to use it, e.g. as an icon for a hard drive or folder, or as a profile pic on a website (a.k.a. an Avatar), you just have to did a little inside OSX…

– in the Finder, select “Go” in the top Menu-bar, and select “Go to folder” from the pulldown-list

– in the screen that opens, paste the following line :

/System/Library/CoreServices/CoreTypes.bundle/Contents/Resources

– now the folder that holds all Apple’s hardware icons and system icons will open

Note : be sure not to mess things up in this folder ! do not delete anything ! deleting or messing up could mean you will have to reinstall OSX !

– in this folder the hardware icon of (nearly) any Mac can be found, the names start with “com.apple.”

– find the Mac-icon you’re looking for, some examples :

aluminium iMac 27″ = com.apple.imac-unibody-27

black MacBook 13″ = com.apple.macbook-black

MacBook Air 11″ (2010 and newer) = com.apple.macbookair-11-unibody

MacBook Pro 13″ (with DVD-burner) = com.apple.macbookpro-13-unibody

– then right-click (CTRL-click) on it and select “Copy” from the popup-menu

– then close the folder (to avoid messing things up, keep this folder open no longer than strictly needed)

– then return to your Desktop (in the Finder) and right-click (CTRL-click) anywhere there

– then choose “Paste” from the popup-menu, and on your Desktop a .ICNS-file with the selected Mac as it’s icon will appear

– then, on the Desktop, right-click (CTRL-click) the icon of your hard drive (normally a generic hard drive icon named “Macintosh HD”) and select “Get Info” from the popup-menu

– then in the “Get Info”-window that opens, select the icon so it will get a blue (selection) glow around it

– then drag&drop the .ICNS-file from your Desktop onto the icon in the “Get Info”-window

that’s it !

Donate Button (MacManusNL)

Note #1 :

if you would also like to give your generically named Macintosh HD a different name, go to the chapter “Name & Extension:” in the “Get Info”-window ; if the small triangle icon in front of it is pointing to the right, click on it to let it point down and the chapter will expand to reveal an entry box where you can type the name you want to give to your hard drive

Note #2 :

if you do not see your hard drive on your Desktop, go to “Finder” in the top Menu-bar and select “Preferences…” from the pulldown-menu ; in the “Finder Preferences”-window that opens, click on the “General”-tab/icon and put a checkmark at “Hard disks”