Tag Archives: trackpad

fixed : trackpad moving but not clicking after sleep mode

Posted on by
Reply

Question :
I have a MacBook Air M4 and it works great. But there’s a problem that I’m encountering that I’ve never seen before on any of my Macs : when my MacBook wakes from sleep mode, I can move the cursor without any problems, but clicking the trackpad to do a ‘mouse click’ to activate anything on screen doesn’t work… the only solution I’ve found until now is to reboot my MacBook using the power button, but that is a very annoying solution…

Is my MacBook’s trackpad broken ? Or is this a software problem that I can fix myself ?

Answer :
There is a small chance you have run into a hardware failure (meaning your MacBook’s trackpad is broken), but it’s far more logical that the problem you are encountering is a software problem :
Did you recently use a wireless Magic Mouse with your MacBook maybe ?
If so, just make sure you have your Magic Mouse turned OFF when you’re not using it.
That’s it !

Even if your Magic Mouse is in another room and/or in a bag, it can interfere with your MacBook’s trackpad, especially after waking from sleep your MacBook can automatically connect to the Magic Mouse and if anything is pressing on it, your MacBook will think that you are already clicking the mouse button and therefore it will not register any clicking of the mousepad…
If you manually switch OFF your Magic Mouse if you’re done using it (so before you put it in your laptop case), your problem will be fixed.

The above could also occur if you use another type or brand of bluetooth mouse (or external trackpad, controller or joystick) with your MacBook.

If you have never used a bluetooth mouse or controller with your MacBook and you still encounter this problem, it will usually be fixed by resetting the PRAM (and NVRAM) :
– shut down your MacBook
– restart your MacBook using the power button
– then, immediately (during the first stage of reboot) press and hold this key-combo :
[CMD]+[ALT]+[P]+[R]
– keep holding the key-combo when your MacBook restarts
– release the key-combo when you hear the macOS startup chime (sound) for the second time and wait for your MacBook to start up

That’s it !

enjoy 😉

fixed : trackpad not responding when clicking

Posted on by
Reply

Question :

I had left my MacBook Pro (Late 2008 running OSX 10.11 El_Capitan) running and had forgotten all about it… after completely recharging everything seemed to be okay on first sight, but it turned out that even though I could use the (internal) trackpad to move the cursor, I wasn’t responding at all to any clicking on it. I therefore had to connect a USB-mouse. Even after restarting, the trackpad was responsive to moving the cursor, but not to clicking…

Is my MacBook’s trackpad broken ? Or is there a software solution I could try ?

 

Answer :

Even tough it’s not possible to completely rule out the scenario that your trackpad is broken, chances are you will be able to get it working properly again by an action that is normally referred to as “Resetting the PRAM”. Here’s how to do that :

  1. shut down your MacBook
  2. take out all cables and USB-sticks (this is just to rule out complications)
  3. restart your MacBook using the POWER-button
  4. immediately press and hold the key-combo [CDM]+[ALT]+[P]+[R]
  5. make sure you do so while the screen is still black
  6. when the screen lights up in light grey, you’ll hear the startup-chime
  7. now release all your fingers from the keyboard before the Apple-logo appears
  8. let your MacBook startup fully, then test if all works as expected
  9. then reconnect any cables and USB-sticks needed

Note : no worries if you act too slowly or too quickly ; if you are too late to press the key-combo, just let your MacBook startup, then shut down and try again ; if you keep pressing the key-combo for too long, you will hear the startup-chime multiple times (you will have reset your PRAM multiple times, but that’s no problem) so just release the keyboard, and just let your MacBook startup and you’re done… 😉

If the problem persists, you might have an ‘exploded battery’ problem. To check this, see if your trackpad is appearing to bulb out of it’s bezel/housing. If that is the case, you probably need to replace the battery to fix this problem. For most MacBooks and MacBook Pro’s from 2012 and older this is something you can do yourself. Some of these models have a battery-lid that can easily be opened, some models need a little unscrewing. (note : MacBook Airs and more recent MacBooks and MacBook Pros have batteries that are really hard to replace, but that doesn’t mean it can’t be done in most cases.) The main problem will be that you need to find the right replacement battery. Amazon has replacement batteries available for most MacBooks and MacBook Pros, don’t mind if it’s not an official Apple battery, read the reviews to make your final choice, because often the imitation batteries are better than the refurbished ones. Here’s a link to one of the most common of these batteries :

replacement battery for 13″ MacBook Pro versions ‘Mid 2009’ to ‘Mid 2012’

enjoy !

Donate Button (MacManusNL)