Tag Archives: DHCP

fixed : Synology and WD MyCloud NAS connection problems on my TP-Link Deco network

Posted on by
Reply

Question :
I have a local WiFi and Ethernet/UTP network that has a TP-Link Deco X60 acting as the DCHP router. In that network I have a Synology DS 218 NAS and a WD MyCloud Home. All this used to work great, but even though I can see both both the Synology and the MyCloud under the Network chapter in the Finder of macOS, both have severe connection problems. Sometimes it is possibel to get connection for a few minutes, but most of the time both the synology and the MyCloud are unreachable. Even using the SynologyAssistant.app the Synology NAS can’t be found. On the other hand, the lights on the Synology and the MyCloud are burning, the Ethernet/UTP-cables are plugged in correctly…
On the other hand, my Apple AirPort Time Capsule is connectable without problems.

What can I do to make my NAS available in my network ?

Answer :
Eventhough there can hardware problems that cause this, it is usually a software problem.
Since you have a TP-Link Deco router, it is possibly a bug introduced in a new version of the firmware. Do this to fix it :

  • make sure all your network devices that you want to cable connect are connected to your network with a Ethernet/UTP cable
  • first, go to your main TP-Link Deco router
  • disconnect the power from the main Deco router
  • then make sure that the Ethernet/UTP cable from port 2 is directly plugged into your internet modem, and the Ethernet/UTP cable from port 1 is connected to the Ethernet/UTP-switch that all other Ethernet-devices are connected to
  • then plug the power cable back into your main Deco router and wait until it’s light turns green
  • then, on your Mac, open a new Finder window and click on “Network” in the menu list on the left
  • then, in the window that opens, click on your Synology NAS’ name, and you’ll see “connecting…” that will turn into “connected as:…” and you will see the folders that are on your NAS
  • this means that your Synology NAS is now available in your network
  • to check this, open the Synology Assistant app and click “Search”
  • when your NAS appears in the list, select it and click “Connect”
  • then the web-based interface opens in your browser login using the you NAS account name and password
  • when the web interface shows the vritual desktop – your done πŸ˜‰
  • to check your WD MyCloud, open the finder once again and click “Network” once again
  • now, click on “MyCloud” and wait for macOS to connect
  • the Finder will then show all files that are on the WD MyCloud
  • That’s it !

enjoy πŸ˜‰

fixed : AppleTV keeps getting new IP address continuously

Posted on by
Reply

Question :

I am using the IP Scanner (and LANscan) software to check my network performance whenever I encounter network problems. I have found that my AppleTV keeps getting multiple IP addresses from my router using DHCP…

What is going on and how can I fix this ?

 

Answer :

The most probable cause of your problem is that you are connection over WiFi and the AppleTV is positioned somewhere where WiFi-reception isn’t optimal, and where multiple base stations are giving an equally strong WiFi-signal, which is causing the AppleTV to constantly switch from a connection to the one WiFi-base station to the other and back again.

There is a slight chance that you have this problem when connecting over Ethernet LAN-cable also… in that case you might have some interference or data-loss on the cable which usually isn’t problematic, but still is sub-optimal…

The best and easiest way to fix this is to give the AppleTV a fixed IP-address.

To do so, do this (in tvOS 7.4 – for other versions of tvOS the actual screens may differ) :

  • unplug the AC-power cable from your AppleTV
  • restart your router (or unplug it from power for 30 seconds)
  • plug the AC-power cable back into your AppleTV
  • turn on your TV (the one that’s connected to your AppleTV)
  • turn on your AppleTV
  • goto Settings (the app that has a Sprocket/Gear-icon)
  • in the Settings-window, click on General
  • in the General-window, click on Network
  • in the Network-window, click on WiFi (or Ethernet if you use it)
  • in the WiFi-window (or Ethernet-window), click on Configure IP
  • in the ConfigureIP-window, make a photo of all settings or write them down (because this exact info is what you are going to enter manually), then click on Manual
  • in the IP-configuration window, roll the dials until the IP is set, then click OK
  • in the Subnetmask-configuration window, roll the dials until the Subnetmask is set, then click OK
  • in the Router-configuration window, roll the dials until the Router IP is set, then click OK
  • in the DNS-configuration window, roll the dials until the DNS is set (or use 008.008.008.008), then click OK
  • then wait for the setting so be accepted while the wheel spins
  • then exit, exit, exit until you’re back on the Home screen

That’s it !

Note : if you want to be completely sure that your AppleTV has accepted all settings, you can unplug and replug your AppleTV from power, but that is not as important as it used to be in older versions of tvOS – and you need to check afterwards in Settings to be completely sure

enjoy πŸ˜‰