fixed : Medisana Oximeter sync hangs at 8%

Question : I have a Medisana PM100BT Oximeter which works great, but since a week or so it hangs during sync ; the sync reaches 8% then nothing happens, the VitaDock+.app hangs and the sync fails.

I’ve looked on the Medisana-website, in their manuals, tried to contact them and searched the internet myself, but I can’t find the solution anywhere… how can I fix this ?

Answer :

The solution is simple if you know the cause : for some reason your Oximeter was switched into “real-time” mode, but it needs to be in “spot-check” mode for the VitaDock+.app syncing to work.

Here’s how to do this :

  • make sure your finger is out of the oximeter
  • now, long-press the green ON/OFF-button
  • when the MODE-screen appears, short-press the green ON/OFF-button to switch to another mode
  • make sure the triangular arrow is at “Spot-check” before proceeding
  • when “Spot-check” is set, long-press the ON/OFF-button to go back to the main screen
  • now, open the VitaDock+.app on your iPhone
  • then, put your finger in the oximeter and press the ON/OFF-button to start the measurement
  • if you have previously set up the oximeter in the VitaDock+.app, the oximeter will now sync
  • if no syncing happens in the VitaDock+.app, click on the Devices-button top-right, scroll down to HEALTH | PULSEOXIMETER, click on it and follow the on-screen directions for setting up the Bluetooth connection.

That’s it !
enjoy ūüėČ

fixed : Xiaomi Mi Band Pulse seems bricked or broken

Question :

As I was fiddling with connecting to a bluetooth speaker, the connection to my Xiaomi Mi Band Pulse suddenly vanished. Even though my iPhone can still see the Mi Band, but it says “Can’t connect to band” and on manual retry connection cannot be established due to a time-out error. In Bluetooth Preferences the Mi Band is visible, but not connected, and on manual retry I also get no connection due to a time-out error.

Is my Mi Band bricked or broken ? If not, what is the right way to reconnect my Mi Band to my iPhone ?

 

Answer :

You are probably in luck as even when your Mi Band seems bricked or broken, is most of the time just hangs and can be fixed doing a reset.

The reset & reconnect procedure in short :

  • switch-off Bluetooth
  • reset the Mi Band
  • reboot your iPhone
  • switch-on Bluetooth
  • reconnect via Bluetooth

That probably isn’t enough info, so here’s a step-by-step walk-through :

  • on your iPhone, swipe-up from the bottom of the screen to get the ‘underwater’ Settings pull-up¬†panel
  • click on the Bluetooth-icon in a white circle, which will then turn grey, indicating Bluetooth is OFF
  • now take the sensor-pod of the¬†Mi Band Pulse out of the bracelet and put it in the refrigerator (yes, the one in your kitchen, but not in the freezer)
  • leave it there for¬†at least one hour (officially that¬†should be¬†at least 4 hours, but experience shows that¬†only one hour will also do most of the time…)
  • first, do a reboot of your iPhone by pressing the MENU- and ON/OFF-buttons at the same time until the screen goes black and a white Apple-logo is displayed [ NOTE :¬†for some iPhones the reboot procedure (a.k.a. “hard reset”) is slightly different¬†;¬†more info can be found here ]
  • when the iPhone comes back up, type your access code to unlock your iPhone
  • then swipe-up from the bottom of the screen, and in the pull-up Settings¬†panel, click on the Bluetooth-icon in a grey circle, which will then turen white, indicating Bluetooth is ON
  • and open the MiFit-app on your iPhone
  • then, take¬†the Mi Band sensor-pod¬†out of the fridge and¬†plug it in the Mi Band-charger cable and put the USB-end into a USB power adapter (a powered USB-port will also do most of the time)
  • now be quick : only during the blinking of a LED on the Mi Band sensor-pod you have the opportunity to reconnect !
  • while the LED blinks, in¬†the Mi Fit-app, in the Status view, click on reconnect to re-establish the Bluetooth-connection between Mi Band and iPhone
  • if all orange-collored texts are gone from the Mi Fit-app, you have successfully reconnected, if not : just unplug & replug the Mi Band sensor-pod, try again and make sure you act quickly
  • everything should now work properly ; enjoy !

If you can’t get it to work using the above procedure, just try again. And if that still doesn’t help after several tries, try these versions of the procedure, in this order :

  1. try again, without putting the Mi Band sensor-pod in the refrigerator
  2. try again, exactly as described (so including the refrigerator procedure)
  3. try again, now keeping the Mi Band sensor-pod in the fridge for at least 4 hours
  4. try again, now keeping the Mi Band sensor-pod in the fridge overnight
  5. try again, but start with deleting the MiFit-app from your iPhone, and reinstall it after reboot
  6. try again, exactly as described

You probably have things up and running by then, but if you’ve done all this and it still doesn’t work, your Mi Band sensor-pod is probably broken and you should contact your reseller for a replacement…

Good Luck & enjoy !

 

Note/update : there seems to be a German language unofficial manual for the similar Mi Band (so not the Mi Band S1 Pulse), that you can get here :

Xiaomi Mi Band¬†–¬†Anleitung, Tipps & Tricks – das inoffizielle Handbuch

A preview excerpt of this book (which might give you some answers also) can be found here :

Google Books preview – Xiaomi Mi Band – Anleitung, Tipps & Tricks – das inoffizielle Handbuch

Donate Button (MacManusNL)