fixed : firmware-update for 70mai A800 dashcam WiFi

Question :

I just bought the best dashcam I could find for an affordable price : the Xiaomi 70mai A800 4K Ultra HD video with WiFi, GPS and ADAS driver assistance built-in.

I want to make sure I have the latest available firmware on the dashcam to enable all available features…

How do I install the latest A800-firmware ?

 

Answer :

Aside from all the great features already included in the Xiaomi 70mai A800 dashcam, user-friendly do-it-yourself firmware upgrades are also available to enable even more new features.

First, make sure you are using the right iOS-app : you need the 70mai (Worldwide) app that can be downloaded here.

Now, connect your iPhone to the 70mai WiFi-network and open the 70mai.app. If you have problems connecting to the 70mai WiFi-network, see this post.

Then, open the 70mai.app and do this to upgrade the firmware :

  • make sure you are on the 70mai.app’s main page (the window labeled “70mai” with a picture of a blue car and your 70mai Dash Cam A800 listed below it)
    • if the 70mai.app opens in the “70mai Dash Cam”-window with the current video stream of the dashcam and the “Take Photo” and “Album”-buttons below it, click the “<“-button top-left and in the “Exit the dash cam homepage?”-popup, click “OK”
  • in the “70mai”-window, make sure that at “Device” it says “Connected”
    • if “Not conneted” is listed, click on it
    • the “70mai Dash Cam”-window will open and the connection will be re-established
    • then, return to the “70mai”-window by clicking on the “<“-button top-left and in the “Exit the dash cam homepage?”-popup, click “OK”
  • back in the “70mai”-window, click the person-icon top-left
  • in the slide-in window click on “My Devices”
  • in the “My Devices”-window, click on “70mai Dash Cam A800”
  • in the next window (also called “My Devices”), click “Firmware Update”
  • when the “Firmware update”-window opens, follow the on-screen instructions to upgrade the firmware to the latest version

…that’s it !

enjoy ūüėČ

Note that you can adjust various dashcam settings (like the Speaker Volume, Video Resolution, Parking Surveillance, ADAS Driver Assistance, etc.) by clicking on the 3dot-icon top-right in the “70mai Dash Cam A800”-screen (where you can see the current video stream from the dashcam with the “Take Photo” and “Album”-buttons below it).

 

 

 

fixed : 70mai A800 dashcam WiFi connection error

Question :

I just bought the best dashcam I could find for an affordable price : the Xiaomi 70mai A800 4K Ultra HD video with WiFi, GPS and ADAS driver assistance built-in.

I can’t get it to connect properly to my iPhone over WiFi however… I can find the 70mai WiFi network in the list of available WiFi networks in the iOS Settings-app, and I can connect to it, since it is shown as the connected WiFi-network… but the WiFi icon (the pie-shaped triangle) isn’t shown in the upper right corner of my iPhone… and when I startup the 70mai.app and click on the “70mai Dash Cam A800” in the “Please add 70mai devices”-window, I get an error : “Unable to get Wi-Fi connection Please enter [Settings – 70mai] to open location permission and then connect the device.” …and when I click on the “Go to open it”-button, the Settings-app opens …there I can set Wi-Fi, but that is already connected to the 70mai WiFi-network…

What is going on… how can I fix this ?

 

Answer :

The solution is simple, but you didn’t understand the given directions… probably because the the error message isn’t really straight forward : it’s in awkwardly translated English and the button only links halfway to where you need to adjust the settings…

First, make sure you are using the right iOS-app : you need the 70mai (Worldwide) app that can be downloaded here.

Then, do this :

  • connect the 70mai A800 dashcam to power
  • open the “System Settings” page (the icon is a hexagram with a dot in it)
    • Note that there’s no touch-screen so you should use the 4 buttons below the screen to navigate through the on-screen menu-structure
  • On the Settings page, you need to set “Wi-Fi hotspot” to “Enable” :
    • select “Disable” (at the top line, right of “Wi-Fi hotspot”)
    • in the “Wi-Fi hotspot”-page that opens you will see the name of the WiFi-network (at “Wi-Fi SSID”) and the WiFi-password (at “Password”)
    • remember these (or leave this screen open)

Then, open the 70mai.app on your iPhone and do this :

  • on the first page (simply called “70mai”) click the “Add device”-button (the only button on-screen)
  • in the “Please add 70mai devices”-page that opens, scroll down to “70mai Dash Cam A800” and click on it
  • when you get the “Unable to get Wi-Fi connection Please enter [Settings – 70mai] to open location permission and then connect the device.” error message, click on “Go to open it”
  • now the Settings.app will open, but it won’t always on the same page inside the Settings.app
  • so, make sure you go to the main Settings-page and clcik on “Wi-Fi” in the list
  • when the “Wi-Fi”-page opens, select the 70mai WiFi-network (with the name that was listed at Wi-Fi SSID”) from the list of “Other Networks” (or “My Networks”)
  • if the WiFi-password is required, use the “Password” that is (or was) displayed on the dashcam’s screen
  • now, even when the 70mai WiFi-network is connected you will still see 4G (or 3G or some other mobile data indication) instead of the WiFi-icon in the top-right corner of your iPhone screen
  • then click on “<Setttings” top-left
  • back in the main Settings-page, scroll all the way down to “70mai” (in the list of apps that starts after “Game Center”) and click on it
  • in the “70mai” page that opens, set “Location” to “While Using the App”
    • you could also set it to “Always”, but that isn’t a great idea since the 70mai WiFi-network is rather poorly protected
  • now, open the 70mai.app again
  • in the “Please add 70mai devices”-page, click on “70mai Dash Cam A800”
  • now, the “Turn on Wi-Fi hotspot”-page will open with a picture that resembles the “Wi-Fi hotspot” page that is displayed on the dashcam
  • there, you should click on “Dash cam WiFi hotspot is turned on” (eventhough it appears to be greyed-out) so a green checkmark will appear
  • then click “Next”
  • on the next page (the “Connect to WiFi hotspot”-page) click “Connect”
  • now the Settings.app will open again, check that the 70mai WiFi-network is listed at “Wi-Fi”
  • then, open the 70mai.app and you will see a countdown-circle on your iPhone and you will hear a voice from the dashcam
  • so, go to the dashcam screen and tap the button bottom-right to confirm
  • now you will see what the dashcam is ‘seeing’ / ‘recording’ in the 70mai.app on your iPhone

…that’s it !

enjoy ūüėČ

Note that you can adjust various dashcam settings (like the Speaker Volume, Video Resolution, Parking Surveillance, ADAS Driver Assistance, etc.) by clicking on the 3dot-icon top-right in the 70mai-app screen.

 

 

 

fixed : how to charge Xiaomi Mi Band Pulse ?

Question :

The Xiaomi Mi Band Pulse seems a great product, but I can’t get it to work.
It seems to come straight from Asia, as the user manual is in Chinese only.
Luckily¬†scanning the QR-code that’s in de manual downloaded the Mi Fit-app, and since the¬†app is in English figuring out how it works was easy.

Only problem was that the app doesn’t include directions on knowing how to¬†charge¬†and when the battery is full…

…the battery pre-charge¬†it came with lasted for less than an hour, so it turned out that the first thing I have to do is¬†charge¬†it…

How do I know ? How can I check ?

 

Answer :

The Xiaomi Mi Band Pulse (a.k.a. Xiaomi Mi Band 1S) is a very high-value-for-money activity tracker indeed. It’s not an extremely accurate top-quality activity monitor, sleep monitor or heart rate monitor, but at this moment it can be considered as the best low-budget activity tracker for people who would normally use the iOS Health app because they want to stimulate themselves into moving or exercising more and want to keep track of their activity during swimming, sporting, exercising and sleeping, even when they can’t keep their iPhones with them.

Secret Trick #1 : Charging :

  • just take the sensor from the bracelet
  • put it in the USB-charging¬†cable the right way round
  • hook it up to a powered USB-port or charger (not included)
  • wait for all 3 leds to light up continuously

Secret Trick #2 : The Missing Manual :

Secret Trick #3 : resetting the Mi Band Pulse / Mi Band 1S :

Secret Trick #4 : try the continuous heart rate app also :

Secret Trick #5 : use it with the iOS Health app also :

  • install the Mi Fit app first and make sure it works with your iPhone
  • then, open the Health app on your iPhone
  • in the Dashboard screen, click on the “Sources” button on the bottom side
  • on the next page click on “Mi Fit”
  • then on the next page choose which data you want to sync between Health app and Mi Fit app
  • then click “Health Data” at the bottom, next to “Sources”
  • then repeat the following for each type of data you want to exchange between the Mi Fit app and Health app :
    • for Sleep Analysis sharing, choose “Sleep” –> “Sleep Analysis” –> “Show on Dashboard” & “Share Data” –> “DATA SOURCES: Mi Fit” –> delete any individual data that you don’t want taken into account
    • for Weight sharing, choose “Body Measurements” –> “Weight” –>¬†“Show on Dashboard” & “Share Data” –> “DATA SOURCES: Mi Fit” –> delete any individual data that you don’t want taken into account
    • for Heart Rate sharing, choose “Vitals” –> “Heart Rate” –>¬†“Show on Dashboard” & “Share Data” –> “DATA SOURCES: Mi Fit” –> delete any individual data that you don’t want taken into account

That’s it ūüėČ

enjoy !

Note/update : there seems to be a German language unofficial manual for the similar Mi Band (so not the Mi Band S1 Pulse), that you can get here :

Xiaomi Mi Band¬†–¬†Anleitung, Tipps & Tricks – das inoffizielle Handbuch

A preview excerpt of this book (which might give you some answers also) can be found here :

Google Books preview – Xiaomi Mi Band – Anleitung, Tipps & Tricks – das inoffizielle Handbuch

Donate Button (MacManusNL)

 

fixed : Xiaomi Mi Band Pulse seems bricked or broken

Question :

As I was fiddling with connecting to a bluetooth speaker, the connection to my Xiaomi Mi Band Pulse suddenly vanished. Even though my iPhone can still see the Mi Band, but it says “Can’t connect to band” and on manual retry connection cannot be established due to a time-out error. In Bluetooth Preferences the Mi Band is visible, but not connected, and on manual retry I also get no connection due to a time-out error.

Is my Mi Band bricked or broken ? If not, what is the right way to reconnect my Mi Band to my iPhone ?

 

Answer :

You are probably in luck as even when your Mi Band seems bricked or broken, is most of the time just hangs and can be fixed doing a reset.

The reset & reconnect procedure in short :

  • switch-off Bluetooth
  • reset the Mi Band
  • reboot your iPhone
  • switch-on Bluetooth
  • reconnect via Bluetooth

That probably isn’t enough info, so here’s a step-by-step walk-through :

  • on your iPhone, swipe-up from the bottom of the screen to get the ‘underwater’ Settings pull-up¬†panel
  • click on the Bluetooth-icon in a white circle, which will then turn grey, indicating Bluetooth is OFF
  • now take the sensor-pod of the¬†Mi Band Pulse out of the bracelet and put it in the refrigerator (yes, the one in your kitchen, but not in the freezer)
  • leave it there for¬†at least one hour (officially that¬†should be¬†at least 4 hours, but experience shows that¬†only one hour will also do most of the time…)
  • first, do a reboot of your iPhone by pressing the MENU- and ON/OFF-buttons at the same time until the screen goes black and a white Apple-logo is displayed [ NOTE :¬†for some iPhones the reboot procedure (a.k.a. “hard reset”) is slightly different¬†;¬†more info can be found here ]
  • when the iPhone comes back up, type your access code to unlock your iPhone
  • then swipe-up from the bottom of the screen, and in the pull-up Settings¬†panel, click on the Bluetooth-icon in a grey circle, which will then turen white, indicating Bluetooth is ON
  • and open the MiFit-app on your iPhone
  • then, take¬†the Mi Band sensor-pod¬†out of the fridge and¬†plug it in the Mi Band-charger cable and put the USB-end into a USB power adapter (a powered USB-port will also do most of the time)
  • now be quick : only during the blinking of a LED on the Mi Band sensor-pod you have the opportunity to reconnect !
  • while the LED blinks, in¬†the Mi Fit-app, in the Status view, click on reconnect to re-establish the Bluetooth-connection between Mi Band and iPhone
  • if all orange-collored texts are gone from the Mi Fit-app, you have successfully reconnected, if not : just unplug & replug the Mi Band sensor-pod, try again and make sure you act quickly
  • everything should now work properly ; enjoy !

If you can’t get it to work using the above procedure, just try again. And if that still doesn’t help after several tries, try these versions of the procedure, in this order :

  1. try again, without putting the Mi Band sensor-pod in the refrigerator
  2. try again, exactly as described (so including the refrigerator procedure)
  3. try again, now keeping the Mi Band sensor-pod in the fridge for at least 4 hours
  4. try again, now keeping the Mi Band sensor-pod in the fridge overnight
  5. try again, but start with deleting the MiFit-app from your iPhone, and reinstall it after reboot
  6. try again, exactly as described

You probably have things up and running by then, but if you’ve done all this and it still doesn’t work, your Mi Band sensor-pod is probably broken and you should contact your reseller for a replacement…

Good Luck & enjoy !

 

Note/update : there seems to be a German language unofficial manual for the similar Mi Band (so not the Mi Band S1 Pulse), that you can get here :

Xiaomi Mi Band¬†–¬†Anleitung, Tipps & Tricks – das inoffizielle Handbuch

A preview excerpt of this book (which might give you some answers also) can be found here :

Google Books preview – Xiaomi Mi Band – Anleitung, Tipps & Tricks – das inoffizielle Handbuch

Donate Button (MacManusNL)