Tag Archives: PowerPC

fixed : get very old iPhoto Library to open in macOS Mojave Photos.app

Posted on by
11

Question :

On my old PowerPC G4 (or G5) Mac I found some old photos in iPhoto.

Is it possible to copy the database and open it in the Photos.app on my new Mac that runs macOS 10.14 Mojave ?

Or do I have to import the photos as just photos and lose all additional info and edit that was done in iPhoto long ago ?

 

Answer :

Of course, the easiest and quickest way to get the original photos into your new Photos.app would be to just import all the old photos into Photo.app. But… as you already mentioned, you will loose all additional info and edits that you added in iPhoto back in the days.

The best way to get as much info and edits into Photos.app as possible is to do the following :

  • connect an external HD, external SSD or USB-stick with plenty of GBs to your old PowerPC G4 or G5 Mac
  • go to Users –> [your account name] –> Pictures –> iPhoto Library
  • copy the iPhoto Library (or even the entire Pictures folder) onto your external HD/SSD or USB-stick
  • when done, eject the external HD/SSD or USB-stick (by dragging it’s icon to the trash or clicking the eject-icon besides it’s name in the Finder) and disconnect it from your old Mac
  • then connect the external HD/SSD or USB-stick to your new Mac
  • download the iPhoto Library Upgrader software from Apple :

https://support.apple.com/en-us/HT202358

  • install the iPhoto Library Upgrader Tool
  • go to Applications –> Utilities –> iPhoto Library Upgrader Tool
  • run the iPhoto Library Upgrader Tool
  • in the window that opens, click on the Choose Library button
  • then select the iPhoto Library that is now on your external HD/SSD or USB-stick
  • then click Continue
  • when done, exit the iPhoto Library Upgrader Tool
  • then go to Apple-menu (Apple-icon top-left in the Finder) –> System Preferences –> iCloud
  • make sure you are Signed In into iCloud
  • then, in the list on the right at “Photos” click on the Options button
  • then make sure that there is a check mark at “iCloud Photos”
  • then exit System Preferences
  • now, double-click the Photos.app while holding down the [ALT]-key on your keyboard
  • now, while starting up Photos.app will ask you which Photos/ iPhoto Library to open
  • then choose the iPhoto Library that’s on your external HD/SSD or USB-stick
  • now, Photos.app will start converting the iPhoto Library to an up-to-date Photos Library
  • when done, Photos.app will display your old iPhoto photos
  • then, in Photos.app, goto Preferences, then General-tab and at Library Location click the ‘Use as System Photo Library’-button, to (temporarily) make the old iPhoto/Photos Library the one that syncs with iCloud
  • then Photo.app will start uploading the old photos to iCloud
  • now, in iCloud, these photos will be merged with the ones that were already in iCloud and they will be sent out to your iCloud (or rather iCloud Photos) connected devices
  • when the uploading is complete, you can quit Photos.app
  • now, double-click the Photos.app while holding down the [ALT]-key on your keyboard
  • now, while starting up Photos.app will ask you which Photos/ iPhoto Library to open
  • then choose the iPhoto Library that used to be your main Photos Library previously (usually the one that is in your current user’s Pictures folder)
  • then, in Photos.app, goto Preferences, then General-tab and at Library Location click the ‘Use as System Photo Library’-button, to make make your main Photos Library the one that syncs with iCloud again and be the one that opens when you startup Photos.app
  • then wait for the ‘new’ (additional old) photos to sync from iCloud and you will have an integrated Photos Library of old and new Photos and iPhoto’s databases

that’s it !

enjoy 😉

Advertisement

fixed : quickly free up disk space on MacOSX 10.6.8 Snow Leopard

Posted on by
Reply

Question :

My son alarmed me today that his ‘good old’ Mac gives a “your startup disk is full” warning at startup. He has our old Intel CoreDuo MacBook that can only run MacOSX 10.6.8 Snow Leopard.

What is the easiest way to free up the much needed harddrive space ?

 

Answer :

There  are various programs that can do the job of identifying which files are cluttering your harddrive and deleting unneeded files.

If you have an older Mac that can not run the latest version of OSX, I would suggest using the DiskWave application to do so, because of 4 reasons :

  1. DiskWave is very small in size (only about 1MB), so you can even install and run it on an extremely full harddrive
  2. DiskWave is able to manage external drives, so you can also run it on a newer/faster/other Mac and connect the problematic Mac as an external drive [ in so called “Target Mode” by restarting the problematic Mac with the T-key pressed and connecting it to the other Mac with a FireWire-cable ]
  3. DiskWave is available for various old versions of MacOSX
  4. DiskWave is FREE to download and use

Using DiskWave is rather straight forward. A quick instruction video can be seen here :

DiskWave instruction video

Getting hold of DiskWave might be problematic however, as the developer’s website (Aymeric Barthe) seems to be down :

Aymeric Barthe website

And the DiskWave app is NOT available from the Mac AppStore either… [ beware not too be fooled into thinking it’s the same as the iDiskWave app ! ]

A secondary problem is that the best available version (DiskWave 0.4) does not support any pre-Core2Duo. For now, all (older) versions of DiskWave can be downloaded here :

download any DiskWave version at Mac.FileHorse.com

Note that DiskWave 0.3.2 is the latest version of DiskWave to run on PowerPC (G3/G4/G5) Macs and 1st generation Intel (CoreSolo and CoreDuo) Macs.

And if those links stop working also, you can download DiskWave 0.3.2 here :

DiskWave_0.3.2

[ !! after downloading, replace the .doc file-extension by .dmg to get the installer !! ]

Enjoy !

Donate Button (MacManusNL)

fixed : use internal SATA hard drive in LaCie “Mac mini”-form factor housing

Posted on by
Reply

Question :

I have an old, square-ish Mac mini (2005 through June 2010), which back-ups to a LaCie FireWire 400 harddrive with the same square-ish form-factor. This morning however, the harddrive inside the LaCie mini has died…

I could just get a completely new external hard drive (with a different design) for my backups now, but I really like the square-ish housing of the LaCie mini together with the Mac mini, so I’ve decided to replace the internal hard disk.

However, it turns out that the internal hard disk of the LaCie mini is an IDE (ATA) hard disk, which are increasingly harder to get than the current Serial-ATA (SATA) hard disks, and generally even more expensive.

Is there a way to use an internal SATA hard disk inside the LaCie mini housing ?

Answer :

Yes, there is.

What you need is this :

– a high-capacity internal 2.5″ laptop SATA harddisk (it is possible using a 3.5″ desktop SATA harddisk, but that is not recommended as explained at the bottom of this post), like a Hitachi TravelStar 1TB SATA harddisk

– a 2.5″ to 3.5″ bay converter-frame, or preferably just the Digitus 2.5″ to 3.5″ bay converter-brackets or alike

– a Wintech SAK-65 bi-directional SATA-to-IDE converter (because of the limited space inside the LaCie mini housing, most other IDE-to-SATA converters will be too bulky too fit in one direction or another)

Note : the Wintech SAK-65 comes with all cables to connect a SATA hard disk to the LaCie mini IDE/ATA-internal

When you have all these parts, the build-in is rather straight forward, especially if you use the manual provided with the Wintech Converter. In short :

1- unplug the LaCie mini form the power and FireWire cables, then remove the white plastic triangular feet from the LaCie mini housing (the are sticker-type feet, so temporarily stick them to a clean smooth surface to store) and unscrew the  screws you find beneath them

2- gently open the housing, unscrew the broken iDE/ATA-hard drive, and take it out

3- gently disconnect the ATA-to-ATA cable, and take it out also

4- then put the new SATA-hard drive in and screw it into place

5- then connect the Wintech converter as outlined in the instruction manual (so, set it’s switch to “Device” and do not forget to connect it to the power using the provided Molex extension cable that includes an extra power connector for the Wintech connector)

6- then connect both Wentronic cables to the hard disk on one end and on the other end to the Molex cable and the Wintech connector

7- then make sure the Wintech connector is slightly twisted in such a way that it is a flat on the hard drive as possible and gently close up the housing (don’t forget the plastic feet)

8- reconnect the power and FireWire cables, and then the LaCie mini will be recognized as and ‘unreadable’ drive by your Mac mini

9- use OSX’s Disk Utility-app to format the drive to “Mac Journaled” format, and it will appear as a healthy drive on your Mac (ready for use, for Time Machine backups or alike)

That’s it

😉

—————————

If you really want to build a 3.5″ SATA harddisk into this LaCie mini housing, it can be done, but it will fit so extremely tight that it comes with some extra things you need to address :

1- you will NOT need the 2.5″ to 3.5″ converter brackets

2- the provided cables will not fit in such a way that the housing can be properly rebuilt, so you will also need :

– a Wentronic 4p-Molex-to-angled-15p-SATA power cable (none of the cables with a regular straight SATA-connector will fit, and even most of the angled SATA-connectors will be too bulky too fit, and even this one leaves less than a mm of room for the housing) to extend the “Molex-with-an-extra-power-wire-for-the-converter”-cable

– a Wentronic SATA-to-angled-SATA data cable (most of the other angled-SATA connectors will be too bulky, but the Belkin SATA-to-angled-SATA data cable will fit as well), but you will even have to strip a little extra off the angled connector to enable the cable to make a ‘near-360’-corner

3- the Wintech SAK-65 bi-directional SATA-to-IDE converter needs to be used stripped of it’s plastic housing as it’s too bulky, and you will need to extend the IDE Master/Slave-cable (the wide and flat cable that looks like a lot of tiny wires next to each other) by opening the connection on the converter and putting the original one from the LaCie mini housing in it’s place (after having taken off the connector of that one also)

4- make sure you don’t adjust the 3.5″ SATA harddrive using the screws, just put it ‘on the floor plate'(to make a little extra space)

5- …and then you will have to puzzle quite a bit to fit all of that into the housing

As mentioned before : using a 2.5″ SATA harddrive is far more convenient and straight forward !

Whichever solution you choose :

Enjoy !

😉

Donate Button (MacManusNL)

tip : play some Plants vs Zombies on your Mac for free

Posted on by
Reply

Question :

I wanted to play the Plants vs Zombies game on my PowerPC (G4/G5) Mac, so I downloaded the demo from the PopCap-website. It installs okay, but when I try to play, nothing happens…

What can I do ?

Answer :

Even though the Plants vs Zombies game is compatible with MacOSX 10.4.11 “Tiger” and newer, it is only compatible with Intel-Macs… so you cannot play the demo, nor the full game on any PowerPC (G4/G5) Mac…

but…

even with a G4 & G5 PPC Macs running OSX 10.5 Leopard you can play the online version…

just use your web browser, and play online from PopCap’s official Plants vs Zombies website :

Plants vs Zombies Chrome (also runs in Safari 5) :

http://chrome.plantsvszombies.com/

fixed : Flash 11 needed on PowerPC Mac (for BBC iPlayer, Facebook video, etc.)

Posted on by
Reply

Question :

I was a happy user of BBC iPlayer, but it has stopped working on my G4 (or G5) PowerPC Mac, since the new BBC iPlayer version requires Adobe Flash 11, and the latest version of Flash released is version Player 10.1.102.64

Isn’t there any way for me to view Flash 11 content on my PowerPC Mac ?

Answer :

There is an unofficial version of Flash for PowerPC that tells websites it is Flash 11 to enable you to view Flash 11 content. This works for BBC iPlayer, Facebook video, YouTube video, Adobe Kuler and various other web services.

This will enable you to access Flash 11 content on your PowerPC Mac, but please be aware that modern video will still be stuttering on a G4 Mac… even with this trick… for YouTube viewing you might be better of using MacTubes ; go here for more info : https://macmanusnl.wordpress.com/2012/07/28/fixed-watch-yo…wered-g4-ibook/

Installing the unofficial Flash 11 is rather simple, but as always with ‘home-brewed’ software, using it is completely AT YOUR OWN RISK !

– first and foremost : BACKUP your Mac ; make a copy of your entire hard drive before you proceed (use TimeMachine for instance)

– after that, and ONLY after that backup being done, open Safari and download the edited Flash-plugin here :

http://www.steelbin.com/FBforFBPPC

–  then goto the download button in the upper right corner of Safari and click it

– then in the “Downloads” windows that opens, click on the folder named “FPforFBPPC”

– when the Finder opens, click on the alias folder named “Internet Plug-Ins” (this folder can also be found at [your hard drive] –> Library –> Internet Plug-Ins)

– inside that folder, right-click (= CTRL + mouse click) on the file named “Flash Player.plugin”

– in the popup menu that appears, choose “Compress Flash Player.plugin”

– you will now have a file named “Flash Player.plugin.zip”, rename it to “Flash Player(original).plugin.zip”

– then right-click on the file named “Flash Player.plugin” and choose “Move to Trash”

– then quit Safari

– then go back to your downloads folder, click on the folder named “FPforFBPPC” once again, and right-click the file “flash Player.plugin” that’s in there

– from the popup menu choose “Label” and a color that indicates to you that this is not an original file (e.g. red or yellow)

– then drag the file “flash Player.plugin” onto the folder alias named “Internet Plug-Ins” that’s right below it

– then click on the file “READ FIRST.rtf” and read the disclaimer that the maker (called SteelBin) has for you !

– now reopen Safari and goto this website :

http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html

– there you can check if you see the video (at STEP1) and if your Flash Player Version is recognized as 11.1.102.55 (at STEP2)

– if that’s okay, you’re done (don’t bother about STEP3 and STEP4)

(if you get any older version of Flash listed… repeat the procedure, and if that still doesn’t work, follow the instructions below for installing a web browser for PowerPC Macs that’s still being updated)

– Now you’re able to use BBC iPlayer and many other modern sites once again on you ‘old’ Mac !

Enjoy !

A big thanks to SteelBin for creating this, please donate to him if you wish to thank him for doing so…

…and a special thanks to Telford Moore for testing the BBC iPlayer with this trick

NOTE :

– if you have trouble using a website or web service because you still get an error that your browser is too old, start using a web browser for PowerPC Macs that is still being updated. You have two options :

Camino :

http://caminobrowser.org

OmniWeb :

http://www.omnigroup.com/products/omniweb/overview/

Note : even though it is suggested elsewhere on the web to combine the use of the unofficial Flash 11 plugin with the TenFourFox web browser, I would advice to not hack TenFourFox to do so… 

Yes, the big advantage of TenFourFox is that it is the closest you can get to the modern day Firefox, but the flipside is that it has plugins (like Flash and QuickTime) completely disabled for security reasons… they’re waiting for HTML5 to make plugins obsolete…

http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported

Donate Button (all)

fixed : watch YouTube on an ‘underpowered’ G4 iBook

Posted on by
1

Question :

I am (still) using an iBook G4 and I very content with it most of the things I use it for. (Even in this day & age of OSX 10.8 “Mountain Lion” and Intel-Macs, I’m still happily using MacOSX 10.5.8 “Leopard” on a PowerPC-Mac…)

And even though Safari 5.0.6 is still doing great for me for regular web browsing, it chokes on YouTube…

How can I fix this ?

Answer :

The iBook G4’s graphics card performance is rather ‘underpowered’ compared to current Macs…

Just install MacTubes, it’s a FREE dedicated application that will run current YouTube-video’s far more smooth than YouTube.com in Safari :

http://www.macupdate.com/app/mac/28608/mactubes

fixed : get newest version of Flash on PowerPC Mac

Posted on by
11

Question :

I’m browsing the internet from my G4 (or G5) Mac, and I get a message that I need to update my version of Flash. But when I go to the Adobe Flash download page, I can only download Flash for the new Intel-Macs… what can I do ?

Answer :

The latest versions of Flash for PPC-Macs (like G4 and G5 Macs) are curiously hidden on Adobe’s website… Here’s how you can download & install :

– go to the regular Flash download page :

http://get.adobe.com/flashplayer/

– then click on the line Different operating system or browser?

– if you would select anything here, you would see that there’s only versions for intel-Macs here, so click on click here (from the line “If your operating system/browser combination is not displayed, click here for older versions of Adobe Flash Player.”)

– If you scroll down that page, you’ll find a table that indicates which version of Flash is the latest one that’s compatible with your G4/G5-Mac’s version of OSX. At the moment I’m writing this, the latest version for “Mac OS X 10.4+ (Power PC processor)” is Flash Player 10.1.102.64, but for some curious reason you cannot download it straight from the list…

– you have to scroll down further on the page, though an enormous list of versions, to find “(Released 11/04/2010)  Flash Player 10.1.102.64 and 9.0.289.0 (126 MB)”, which is just above the “Android Flash Player versions” chapter.

– then click on Flash Player 10.1.102.64 and 9.0.289.0 to download

– then open the download and unZIP it by double-clicking on it

– then open the folder “fp_10.1.102.64_and_9.0.289.0_archive”, and go to “Flash Player 10.1.102.64” —> “10_1r102_64” —> “flashplayer10_1r102_64_ub_mac.dmg” and double-click it

– in the window that opens, click on “Install Adobe Flash Player”, and follow the instructions to install… that’s it !

Note : judging from the fact that Adobe is now at Flash Player 11, and the latest version for G4/G5-Macs is Flash Player 10.1, one would assume that support of Flash on G4/G5-Macs is slowly, but steadily, fading…

Donate Button (all)