Tag Archives: Mac mini

fixed : 10.7.5 refusing to see the Atheros AR9280

Posted on by
Reply

I must admit the title might be a little misleading, since I have not had anyone claiming problems like the “WiFi: no hardware installed”-error with the Atheros AR9280 AirPort-card and MacOSX 10.7.5 yet, but still…

…that is probably due to the fact that the MacOSX 10.7.5 updater doesn’t overwrite the IO80211Family.kext system extension. So if you are upgrading from an earlier version of MacOSX 10.7 “Lion” which you had already ‘patched’ for use with the Atheros AR9280, you won’t get any (new) issues…

Anyway…

If you do get the “WiFi: no hardware installed”-error after upgrading to MacOSX 10.7.5 (e.g. from MacOSX 10.6 “Snow Leopard” or earlier), you can just do the same ‘patch’ of reinstalling the old IO80211Family.kext system extension. Instructions for doing so can be found here :

https://macmanusnl.wordpress.com/2012/05/17/1074_refuses_to_see_atheros_ar9280/

Enjoy !

Donate Button (all)

info : are you ready for Mountain Lion ?

Posted on by
5

Apple is getting everything in place for the release of OSX 10.8 “Mountain Lion” due later this month.

The names of the Macs that will be able to run OSX 10.8 “Mountain Lion” have been published on the Apple website :

http://www.apple.com/osx/how-to-upgrade/

From eldest to newest these Macs are :

– iMac “mid 2007” or newer (so any “Aluminum” iMac)

– MacBook Pro “mid/late 2007” or newer (so any MacBook Pro with an NVIDIA graphics card)

– Mac Pro “early 2008” or newer (so any Mac Pro with the Xeon 5400 “Harpertown” processors or newer)

– MacBook Air “late 2008” or newer (so any MacBook Air with Thunderbolt or MiniDisplayPort)

– MacBook “Aluminum” = “late 2008″ (so the 13” MacBook Pro look-alike)

– MacBook “White – early 2009” or newer (so only the ‘original’ white polycarbonate design versions that have an NVIDIA graphics card)

– Xserve “early 2009” (so only the latest generation with Xeon 5500 “Gainestown” processors)

– Mac mini “early 2009 & late 2009” (so only the original Mac mini design that have an NVIDIA graphics card)

– Mac mini “Aluminum” = “mid 2010” or newer (so any Mac mini of the extra flat redesign)

…that’s the bad news (for some  – those of us with older Macs…)

and the good news is :

you don’t need to have MacOSX 10.7 “Lion” installed to upgrade, you only need MacOSX 10.6 “Snow Leopard” with the “Mac App Store” application (since OSX 10.8 “Mountain Lion” is only available from the Mac App Store…)

info : setting up Back To My Mac through a TG712 modem-router

Posted on by
Reply

Question :

How do I setup my Thomson TG712 modem-router to allow me to use the the Back To My Mac function of my Macs ?

Answer :

Here’s how to turn on Back To My Mac when you have a TG712 modem-router :

– on your Mac, go to Apple —> System Preferences —> iCloud

– then put a check mark at “Back To My Mac” to turn the service on

– if there’s a “More…”-botton click it, just for your information ; if a warning is listed, read it, keep it in mind, and don’t bother…

– then open Safari (or any other internet browser) on your Mac, and type the web based control panel’s IP-address of your router-modem as the URL ; for the TG712 router- modem, the IP-address is 192.168.1.254

– in the web based control panel, go to “Toolbox” (in the menu on the left) –> “Games & Apps Sharing” (in the menu on the left)

– then in the middle of the page, at the bottom, from the “Choose a task…” list, click on “Add a game or application to a local networking device” (the first link in the list)

– in the page that opens, put check marks both at “Use UPnP:” and “Use extended security:”

– and set the “Game or App”-dial (the one that is initially at “ABC (Another Bittorent Client)”) to “Back To My Mac”

– set the “Device”-dial to your Mac (which is the Mac that you would like to use with Back To My Mac, so probably your Mac-server or desktop-Mac)

– just to be able to trace possible errors, put a check mark at “Logging”

– then click on the “Add”-button

– wait for the router-modem to restart

– logout by closing the browser-page with the web based control panel on it

Now you should be able to log into your (home) Mac, when being at a remote location (if there’s internet connection there…)

Donate Button (all)

fixed : installing a new hard disk (option 1)

Posted on by
2

Here’s a simple 3-step way of replacing a HD in a Mac :

[ in this example a new HD is put into a Mac mini (version mid 2007) ]

1- clone the internal HD directly onto the new HD
These instructions assume you have another Intel-Mac and a USB-enclosure for a SATA-harddisk (that you will afterwards use to turn the old internal HD into an external one) available :
– put the new harddrive into the USB-enclosure
– connect the USB-cable to your other Intel-Mac
– connect the Mac mini to the Intel-Mac using a FireWire-cable
– (temporarily, just during startup) connect a USB-keyboard to your Mac mini
– startup the Mac mini while pressing the T-key on the keyboard (“Target Mode”)
– both the Mac mini and the USB-connected new HD will now show up in your Finder (on the Intel-Mac)
– open Disk Utility
– click on the Erase-tab
– select the USB-connected HD list on the left, and erase it in MacOS Extended (Journaled) format
[ BEWARE : do NOT format your HD in MacOS Extended (“Case-sensitive” Journaled) mode ! As that will prevent some applications to run ! e.g. Adobe Photoshop 10 Editor ]
– click on the Restore-tab
– from the list on the left drag the partition of your Mac mini onto the “Source”-field
– then drag the new partition from your new HD onto the “Destination”-field
– click the Restore-button, and wait

2- replace the HD
– open the instructions on how to replace the HD from the iFixit-website (or print them out) and read them

http://www.ifixit.com/Guide/Installing-Mac-mini-Model-A1176-Hard-Drive/1108/1

– get the new HD out of the USB-enclosure
– now gently open the Mac mini enclosure
– blow the dust of the interior using a compressed air blower [ do NOT use a hair dryer ! ] or using a vacuum cleaner with a piece of thin cloth (e.g. a napkin) tightly fit to the suction tube (to prevent anything from actually being sucked in)
– replace the HD (make sure the connectors are clean and fit thight)
– while you’re at it, you might also check the AirPort-card connector
– and finish up (all using the iFixit-instructions)

3- test the new HD
– restart

Note : if you would like an alternative procedure for replacing a hard drive in a Mac, look here :

https://macmanusnl.wordpress.com/2012/06/12/installing-a-new-hard-drive-2/ 

fixed : quickly share your Mac’s internet connection to your iPad

Posted on by
Reply

Question :

I just got myself a WiFi-only iPad, but I have no WiFi reception in my living room (that’s why my Mac in my living room is connected to my network through an Ethernet/UTP-cable). Is there an easy way to get internet connection on my iPad in my living room ?

Answer :

Yes, there is.

Your Mac can share it’s internet connection from one of it’s internal network-connections to another. So from Ethernet to WiFi in your case.

To get it working is easy :

– turn on your Mac (if your Mac isn’t running, this won’t work)

– go to System Preferences (under the Apple-dropdown menu in the upper left corner of the desktop/Finder-menu)

– in the window that opens, click on “Sharing”

– in the screen that opens, click on “Internet Sharing” in the list on the left

– then, on the right, select your incoming network/internet connection at “Share your connection from:” (so, in this case select “Ethernet” there)

– and then select your outgoing internet connection at “To computers using:” (so, in this case put a check mark at “Wi-Fi”)

– if you want your shared internet to be password protected, click on the “Wi-Fi Options…”-button and choose your preferred network name, the preferred password protection protocol and your preferred password. If you don’t need protection, just leave everything as-is.

– then put a check-mark at “Internet Sharing” in the list on the left and quit System Preferences

– now you will see that your AirPort/WiFi-pie icon in the upper right of the desktop / finder-menu has turned into a new icon with an arrow pointing upward.

– then, on your iPad (or iPhone or any other WiF-connectable device) go to Settings, click on WiFi and select your new local WiFi-network

– done ! enjoy !

Note : you’ve just turned your Mac into a local WiFi-router (also), so remember that your Mac has to be switched on to sustain the WiFi-network connection

tip : planning on buying Apple stuff ?

Posted on by
Reply

If you’re planning on buying Apple hardware, be it an iPod Shuffle, iPod Nano, iPod Classic, iPod Touch, iPhone, iPad, MacBook Air, MacBook, MacBook Pro, Mac mini, iMac, Mac Pro or Cinema Display, you should consider checking if now is the right time to buy first.

MacRumors’ Buying Advice doesn’t advice you on what product to buy, just on WHEN to buy and when not to buy (which means : “hold on and wait just a little until the product gets refreshed”) :

http://buyersguide.macrumors.com/

MacRumors’ Buying Advice is based on the regularity of the product cycles of Apple hardware (not on the rumors, but current rumors on upcoming hardware are listed also …as MacRumors originally is an Apple rumor site…)

The ‘advice’ categories are :

Buy now! Product just updated

Buy only if you need it – Approaching the end of a cycle

Don’t buy – updates soon

[ for your convenience, I also included this “When (not) to buy ?” link as an extra at the (static) top of this website ]

tip : new firmware that might improve WiFi/AirPort-stability

Posted on by
Reply

Apple has released firmware updates that might improve WiFi/AirPort-stability on your 2011 Mac after the OSX 10.7.3 update :

Mac mini (Mid 2011) EFI firmware update 1.6

http://support.apple.com/kb/DL1500

MacBook Pro (Early 2011) EFI firmware update 2.7

http://support.apple.com/kb/DL1499

iMac (Mid 2011) EFI firmware update 1.9

http://support.apple.com/kb/DL1498

MacBook Air (Mid 2011) EFI firmware update 2.4

http://support.apple.com/kb/DL1497